徐鑫灿,陈正义,崔利,杜杨洋
XU Xin-can,CHEN Zheng-yi,CUI Li,DU Yang-yang

• 1:新凤鸣集团股份有限公司

摘要(Abstract)：

通过120 mm大板径喷丝板生产368 dtex/576 f多孔细旦涤纶预取向丝(POY),研究了纺丝工艺条件对POY生产稳定性及物性指标的影响。结果表明:熔体输送温度为280℃,纺丝温度为286℃,纺丝组件初始压力为18.2 MPa,环吹风压为50 Pa,双油嘴上油,集束位置750 mm,纺丝速度为2 650 m/min时,可制得生产稳定和性能优良的多孔细旦POY,产品的断裂强度CV值为2.56%,断裂伸长率为122.3%,断裂伸长率CV值为2.58%,条干不匀率为0.78%。
The 368 dtex/576 f multiporous and micro-POY was prepared by using 120 mm large diameterspinneret. The effect of the spinning conditions on the production stability and physical properties of POYwas studied. The results showed that the multiporous and micro-POY with production stability and superiorproperties could be produced by controlling the melt transfer temperature 280 ℃, spinning temperature286 ℃, spin pack initial pressure 18.2 MPa, circular air pressure 50 Pa, double nozzles finishing and gatherposition 750 mm, spinning speed 2 650 m/min. The obtained POY had the break strength CV value 2.56%,the elongation at break 122.3% and its CV value 2.58%, the yarn irregularity was 0.78%.

关键词(KeyWords)： 多孔细旦POY;纺丝工艺;大板径喷丝板
multiporous and micro-POY,spinning technology,large diameter spinneret

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 徐鑫灿,陈正义,崔利,杜杨洋
XU Xin-can,CHEN Zheng-yi,CUI Li,DU Yang-yang

DOI: 10.16090/j.cnki.hcxw.2015.11.008

参考文献(References)：

• [1]中国石油化工集团公司人事部,中国石油天然气集团公司人事服务中心.涤纶长丝纺丝[M].北京:中国石化出版社,2008.
• [2]康爱旗,舒明芳.经编珊瑚绒用多孔细旦涤纶拉伸变形丝的生产技术[J].合成纤维,2014,43(2):17-20.
• [3]李允成,徐心华.涤纶长丝生产[M].北京:中国纺织出版社,1995.
• [4]李允成,夏明.高速纺喷丝板孔径的探讨[J].合成纤维,1992(4):28-30.
• [5]江力,王皓,王丹丹.167 dtex/288 f阳离子染料可染细旦涤纶长丝的生产工艺[J].合成纤维,2012,41(10):39-41.