张晓辉,李龙,赵伟
ZHANG Xiao-hui,LI Long,ZHAO Wei(Xi'an Polytechnic University

• 1:西安工程大学

摘要(Abstract)：

将导电聚合物聚苯胺采用现场吸附聚合法吸附到涤纶织物表面上制备复合导电织物,通过单因素分析得出第一次聚合并掺杂的较优工艺条件为:苯胺浓度0.25mol/L,氧化剂过硫酸铵质量浓度0.02g/mL,掺杂剂盐酸浓度2.5mol/L,反应时间2h,反应温度20℃。若将经第一次聚合掺杂处理的织物在相同工艺参数条件下再经过第二次掺杂,则能显著提高导电织物的电学性能。从光学显微镜里可以看到聚苯胺沉积在纤维表面上,形成致密且均匀分布的连续导电膜。
Electroconductive polymer is placed to the surface of polyester fabric by the method of absorption polymerisation to produce compound electroconductive fabric and it is concluded the best process conditions by single-factor analysis:polyaniline concentration 0.25 mol/L,ammonium persulfate(oxidant)density 0.02 g/mL,doping agent(HCL) concentration 2.5 mol/L,reaction time 2 h,reaction temperature 20 ℃.The re-foreign matter can significantly improve the electroconductive function of electronics fabric,the compact and uniform distribution continuous electroconductive film produced by settling the polyaniline on the fabric can be seen by the analysis of micro-state of compound electroconductive under the optical microscope.

关键词(KeyWords)： 聚苯胺;涤纶;导电织物;掺杂;制备
polyaniline,polyester,conductive fabric,doping conductivity,preparation

Abstract:

Keywords:

基金项目(Foundation): 陕西省教育厅自然科学专项项目(09JK470)

作者(Author): 张晓辉,李龙,赵伟
ZHANG Xiao-hui,LI Long,ZHAO Wei(Xi'an Polytechnic University

DOI: 10.16090/j.cnki.hcxw.2010.08.014

参考文献(References)：

• [1]刘维锦,沈家瑞.聚苯胺导电纤维的结构与性能[J].纺织学报,2000,21(4):224-226.
• [2]潘玮,黄素萍.聚苯胺/涤纶导电复合纤维的制备[J].中国纺织大学学报,2002,26(4):96-99.
• [3]潘玮,黄素萍,龚静华.聚苯胺/涤纶导电纤维的制备及其抗静电性能研究[J].合成纤维,2002,31(1):30-32.
• [4]潘玮,黄素萍,龚静华等.聚苯胺/涤纶导电织物导电性能研究[J].上海纺织科技,1998,27(8):55-57.
• [5]唐劲松,王利祥,景遐斌等.苯胺的化学聚合[J].应用化学,1988,5(4):12-16.
• [6]刘站华.聚苯胺/氨纶包缠纱复合导电织物的制备及其性能研究[D].东华大学.2005.
• [7]彭霞辉,刘静宇.聚苯胺合成研究进展[J].精细化工中间体,2002,32(6):13-14.
• [8]潘玮,黄素萍,龚静华,吴药镜.聚苯胺/涤纶导电纤维的结构与性能[J].上海纺织科技,2001,29(4):58-60.
• [9]MacDiarmid A G,Epstein A J.The concept of secondary as applied to polyaniline[J].Synthetic Metals,1994,65:103-106.
• [10]马永梅,黄向阳,过俊石等.二次掺杂对聚苯胺导电复合物性能的影响[J].高等学校化学学报,1997,18(9):1560-1564.