崔华帅,周杰,吴鹏飞,史贤宁,黄庆
CUI Hua-shuai,ZHOU Jie,WU Peng-fei,SHI Xian-ning,HUANG Qing

• 1:中国纺织科学研究院

摘要(Abstract)：

纺制了聚乙交酯(PGA)纤维,并对其进行了不同温度和时间的热处理。对处理后PGA纤维的结构进行了测试,并将其放置于恒温箱的磷酸盐缓冲液中进行两周降解处理,研究了不同热处理工艺下PGA纤维的结构及降解性能。试验结果表明:随着热处理温度的提高,PGA纤维材料的晶区取向度变化不大,结晶度逐渐增大,晶粒尺寸也相应发生变化;在试验条件下,经过恒温缓冲液两周时间的降解处理,纤维的强度保持率随热处理温度提高呈现先增大后降低的趋势,纤维的强度保持率在110℃出现最大值;同时,在热处理温度110℃时,随着热处理时间的延长,PGA纤维的强度保持率增加。
Polyglycolic acid(PGA) fibers were prepared by spinning and different drawing process, then were heat set in relaxation with different temperature and time. The structure of PGA fibers after heat treatment were characterized. After that the PGA fibers were placed in the incubator for two weeks for degrading treatment. The study showed that with the increase of the relaxation heat setting temperature, the crystal orientation of the PGA fibers had a little changes, but the crystallinity and the crystalline region increased;with the increasing temperature of heat setting, the strength retention of fiber increased at first then reduced, biggest at 110 ℃; with the increasing time of heat setting, the strength retention of PGA fibers increased.

关键词(KeyWords)： 聚乙交酯;热定形;结构;降解;强度保持率
polyglycolic acid;heat setting;structure;degradation;strength retention

Abstract:

Keywords:

基金项目(Foundation): 国家重点研发计划重点专项(2016YFC1100802);; “纺织之光”应用基础研究项目(J201501)

作者(Author): 崔华帅,周杰,吴鹏飞,史贤宁,黄庆
CUI Hua-shuai,ZHOU Jie,WU Peng-fei,SHI Xian-ning,HUANG Qing

DOI: 10.16090/j.cnki.hcxw.2017.09.006

参考文献(References)：

• [1]郭红霞,王笑星,刘淑强,等.聚乳酸医用缝合线载药微球附载效果测试与优化[J].合成纤维,2015,44(12):25.
• [2]王文举,宋婧怡.一种新型生物降解性高分子材料(PGA)合成进展研究[J].通化师范学院学报,2005,26(2):55.
• [3]杨庆,沈新元,郯志清,等.聚乙交酯纤维纺丝工艺研究[J].合成纤维,2006,35(2):18.
• [4]GULGUNE P,BHAT G,SPRUIELL J.Structure and properties develepment in poly(phenylene sulfide)fibers.Ⅱ.Effect of One-Zone Draw Annealing[J].Journal of Applied Polymer Science,2012,125(3):1890-1900.