刘克杰,杨文良,彭涛,王凤德
LIU Ke-jie,YANG Wen-liang,PENG Tao,WANG Feng-de(High Performance Fiber Section

• 1:中蓝晨光化工研究院研发中心特种纤维研究室

摘要(Abstract)：

对芳纶表面改性的化学方法进行了概述。论述了表面刻蚀技术、表面接枝技术在芳纶表面改性过程中的应用过程、反应原理、改性效果,对化学改性技术的优缺点进行了分析,指出了其进一步的发展趋势。
In this paper,the chemical surface modification methods of aramid fiber is outlined.The application process,the reaction principle,the modification effect of aramid fiber surface modification are discussed inclcuding surface etching technology,surface grafting technology.The advantages and disadvantages of chemical modification are analyzed,and the further development on the chemical surface modification methods of aramid fiber is pointed out.

关键词(KeyWords)： 芳纶;化学改性;进展
aramid fiber,chemical modification,progress

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 刘克杰,杨文良,彭涛,王凤德
LIU Ke-jie,YANG Wen-liang,PENG Tao,WANG Feng-de(High Performance Fiber Section

DOI: 10.16090/j.cnki.hcxw.2011.07.026

参考文献(References)：

• [1]刘克杰,杨文良,彭涛,等.芳纶表面改性技术进展(一)——物理改性方法[J].合成纤维,2011,40(6):25-30.
• [2]王扬,李鹏,于运花,等.芳纶纤维的磷酸表面处理及其树脂基复合材料界面性能[J].复合材料学报,2007,24(3):7-12.
• [3]J Maity,C Jacob,C K Das,et al.Fluorinated aramid fiber reinforcedpolypropylene composites and their characterization[J].Polymer Compos-ites,2007,28(4):462-469.
• [4]P A Tarantili,A G Andreopoulos.Mechanical properties of epoxiesreinforced with chloridetreated aramid fibers[J].Journal of AppliedPolymer Science,l997,65(2):267-275.
• [5]C Y Yue,K Padmanabhan.Interfacial studies on surface m odifiedkevlar fiber/epoxy matrix composites[J].Composites:Part B,1999,30:205-2l7.
• [6]David A Holden,Said Dimitry.Cold-molded cementitious compositesreinforced with surface-modified polyamide fibres and method ofpriparing same:US,4974522[P].1990.
• [7]Motowo Takayanagi,Teruo Katayose.N-substituted poly(p-phenyleneterephthalamide)[J].Journal of Polymer Science:Polymer Chemistry　Edition,1981,19(5):1 133-1 145.
• [8]Motowo Takayanagi,Tisato Kajiyama,Teruo Katayose.Surface-modified Kevlar fiber-reinforced polyethylene and ionomer[J].Journal ofApplied Polymer Science,1982,27(10):3 903-3 917.
• [9]Motowo Takayanagi等.与环氧树脂复合的Kevlar纤维表面处理的新化学方法[J].国外纺织技术,1990,17(4):10-14.
• [10]V Ravichandran,S K Obendorf.Wettability and adhesion studies ofgrafted poly(p-phenylene terephthalamide)fiber surfaces[J].Journal ofAdhesion Science and Technology,1992,6(12):1 303-1 323.
• [11]Jeng-Shyong Lin.Effect of surface modification by bromination andmetalation on Kevlar fibre-epoxy adhesion[J].European Polymer Journal,2002,38(1):79-86.
• [12]Tao Ai,Rumin Wang,Wenying Zhou.Effect of grafting alkoxysilaneon the surface properties of Kevlar fiber[J].Polymer Composites,2007,28(3):412-416.
• [13]雷渭媛,刘国俊.芳纶复合材料的界面粘结[J].复合材料学报,1991,8(4):27-36.
• [14]袁海根,王汝敏,艾涛.表面处理对Kevlar纤维复合材料界面结合强度的影响[J].化学推进剂与高分子材料,2005,3(5):38-41.
• [15]L S Penn,B Jutis.The effect of pendent croups at the fiber surfaceon interfacial adhesion[J].The Journal of Adhesion,1989,30(1-4):67-81.
• [16]R J Day,K D Hewson,P A Lovell.Surface modification and itseffect on the interfacial properties of model aramid-fibre/epoxycomposites[J].Composites Science and Technology,2002,62(2):153-166.
• [17]C T Chou,L S Penn.Chemical bonding and physical interaction byattached chains at the fiber-matrix interface[J].The Journal of Adhesion,1991,36(2-3):125-137.
• [18]郑光,黄鹏程.聚芳酰胺纤维表面改性方法:CN,1614134A[P].2005.
• [19]王斌,丘哲明,杨建奎.F-12芳纶纤维表面处理对复合材料剪切性能的影响[J].固体火箭技术,1995,18(1):64-68.
• [20]郑玉婴,傅明连,蔡伟龙,等.有机高性能Kevlar纤维表面改性研究[J].光谱学与光谱分析,2004,24(4):418-420.
• [21]尤志强,胡祖明,陈蕾,等.Technora纤维的表面改性研究[J].高科技纤维与应用,2009,34(1):30-33.
• [22]张康助.芳纶纤维表面处理初探[J].宇航材料工艺,1991(4):95-96.
• [23]龙军,张志谦,魏月贞.接枝偶联剂对F-12纤维表面改性的影响[J].材料科学与工艺,2000,8(1):77-80.
• [24]于涛,顾伯勤,陈晔.芳纶表面处理对纤维增强橡胶基复合密封材料性能的影响[J].润滑与密封,2005(1):70-72.
• [25]Ramazan B,Giuliana C T Effect of surface-limited reactions on theproperties of Kevlar R fibers[J].Textile Research Journal,1990,60(6):334-344.
• [26]G S Sheu,T K lin,S S Shyu,et al.Improvement of adhesion ofKevlar fiber to epoxy by chemical modification[J].Journal of AdhesionScience and Technology.1994,8(5):511-530.
• [27]T K Lin,S J Wu,J G.Lai,et al.The effect of chemical treatment onreinforcement/matrix interaction in Kevlar-fiber/bismaldimide composites[J].Composites Science and Technology,2000,60(9):1 873-1 878.
• [28]Yulong Wu,Guiliana C Tesoro.Chemical modification of Kevlarfiber surfaces and of model diamides[J].Journal of Applied Polymer Sci-ence,1986,31(4):1 041-1 059.