夏友谊
XIA You-yi (Department of Polymer Science and Engineering

• 1:安徽工业大学化学与化工学院高分子科学与工程系

摘要(Abstract)：

采用原位化学氧化聚合方法在聚丙烯腈纤维表面生成聚3,4-乙撑二氧噻吩,制备得到纤维表面均匀覆盖聚3,4-乙撑二氧噻吩的改性导电纤维,其电导率约为1×10-3S/cm。纤维表面与导电聚合物的相互作用改善了原纤维的耐热性能,并对其力学性能没有造成伤害。
Conductive polyacrylonitrile fiber modified by poly(3,4-ethylenedioxythiophene) was fabricated successfully by in-situ chemical oxidation polymerization. The surface of polyacrylonitrile fiber was covered entirely and uniformly by conductive polymers. The novel composite fiber exhibited a conductivity of 1×10-3 S·cm-1, and still possessed former fibrillar morphologies and strength properties. In addition, improved thermal stability of the composite fiber was also observed.

关键词(KeyWords)： 聚丙烯腈;聚3,4-乙撑二氧噻吩;原位化学氧化聚合
polyacrylonitrile, poly(3,4-ethylenedioxythiophene), in-situ chemical oxidation polymerization

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 夏友谊
XIA You-yi (Department of Polymer Science and Engineering

参考文献(References)：

• [1]Kutanis S,Karaklsla M,et al.The conductive polyaniline/poly(ethylene terephthalate)composite fabrics[J].Composites:Part A2007,38:609-614.
• [2]Bai J Y,Yanc Q,Shen X Y.Preparation of polypyrrole/nylon-6 composite conducting fiber[J].Synthetic Tech and Appl,2005,20:30-32.
• [3]Garreau S,Louarn G,Buisson J P.In situ spectroelectrochemical raman studies of poly(3,4-ethylenedioxythiophene)(PEDT)[J].Macromolecules,1999,32:6807-6812.
• [4]Badawy S M,Dessouki A M.Cross-linked polyacrylonitrile prepared by radiation-induced polymerization technique[J].J Phys Chem,B,2003,107:11273-11279.