合成纤维

2008, No.234(08) 29-32

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Archive) | 高级检索(Advanced Search)

喷头拉伸对三角形PAN纤维湿法凝固成形的影响
Effect of Jet Stretch on Triangular PAN Fiber Coagulation Formation in Wet-spinning

范军亮,温月芳,杨永岗,刘朗
FAN Jun-liang1,2,WEN Yue-fang1,YANG Yong-gang1

摘要(Abstract):

采用三角形喷丝孔,在二甲基亚砜(DMSO)水溶液凝固成形过程中,研究了不同喷头拉伸比对聚丙烯腈(PAN)初生纤维的截面形状和表面形貌、声速、结晶度以及力学性能的影响。结果表明:当喷头拉伸比增大到0.9倍时,初生纤维的截面的"角部钝化"现象消失,截面变形为和喷丝孔相似的形状;与此同时,初生纤维的力学性能也发生了显著的变化;而且,随着喷头拉伸比的增加,初生纤维的声速取向、结晶度及晶粒尺寸都逐渐增加。
PAN triangular nascent fiber was spun through triangular spinneret by wet-spinning process.The cross-sectional and surface morphology,the velocity of sound,degree of crystallization,crystal size and mechanical properties were measured under the condition of various jet stretches.The results showed that "three obtuse-tips" phenomena on cross-section of triangular fiber disappeared with jet stretch ratio of 0.9.At the same time,mechanical properties of triangular PAN nascent fiber had also an obvious change.Furthermore,the velocity of sound,degree of crystallization and crystal size increased with the increasing of jet stretch ratio.

关键词(KeyWords): 三角形纤维;喷头拉伸比;声速;力学性能;结晶度
triangular fiber,jet stretch ratio,the velocity of sound,mechanical property,degree of crystallization

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(编号50604025)

作者(Author): 范军亮,温月芳,杨永岗,刘朗
FAN Jun-liang1,2,WEN Yue-fang1,YANG Yong-gang1

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享