吴建军,王玲
WU Jian-jun,WANG Ling

• 1:安徽皖维高新材料股份有限公司

摘要(Abstract)：

通过对原液溶解状况、纺丝成形、丝束含硼量的控制,在对纤维进行高倍拉伸的情况下,设置较高的热定形温度和冷却收缩率,可获得高强度、高断裂伸长率的高强高模聚乙烯醇(PVA)纤维。热定形温度为200℃、冷却收缩3 m时,得到了断裂强度13.0 cN/dtex、断裂伸长率7.4%的产品。
High strength and high modulus PVA fiber with high elongation can be obtained by controlling the dissolving solution, spinning forming and boron content with setting higher heat temperature and higher cooling shrinkage. When the heat temperature is 200 ℃ and the cooling shrinkage is 3 m, the product with strength of 13.0 cN/dtex and elongation of 7.4% is obtained.

关键词(KeyWords)： 高强高模PVA纤维;断裂伸长率;冷却收缩率
high strength and high modulus PVA fiber;elongation at break;cooling shrinkage

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 吴建军,王玲
WU Jian-jun,WANG Ling

DOI: 10.16090/j.cnki.hcxw.2021.09.009

参考文献(References)：

• [1] WU C. Micromechanical tailoring of PVA-ECC for structural applications[D]. Michigan:University of Michigan, 2001.
• [2]王光钊,高飞.高强高模聚乙烯醇纤维生产工艺[M].合肥:合肥工业大学出版社, 2018.
• [3]董纪震,罗鸿烈,王庆瑞,等.合成纤维工艺学[M].北京:纺织工业出版社, 1993.