麻聪,俞昊,段小超,杨通辉
MA Cong,YU Hao,DUAN Xiao-chao,YANG Tong-hui

• 1:东华大学材料科学与工程学院

摘要(Abstract)：

通过差示扫描量热法(DSC)测试了成核剂对可熔融加工改性聚乙烯醇(PVA)结晶行为的影响,并在DSC的基础上用Ozawa法、Jeziorny法以及莫志深方法分析了改性PVA以及改性PVA/成核剂两种材料的非等温结晶动力学。结果表明:结晶度、结晶峰温度、结晶半衰期、结晶速率对降温速率有很强的依赖性;随着降温速率的增加,结晶速率常数增大,结晶度提高;在相同的降温速率下,复合体系的结晶速率常数较大,即成核剂的加入使改性PVA的结晶速率增加,具有异相成核的作用;其中莫志深方法能够较好地解释改性PVA的非等温结晶过程。
The non-isothermal crystallization behaviors of melt processable modified polyvinyl alcohol(PVA)/nucleating agent composite were investigated by differential scanning calorimetry(DSC). The non-isother-mal crystallization kinetics of the two materials were analyzed by Ozawa,Jeziorny and Mo Zhishen methods.The results showed that crystallinity,crystallization peak temperature,t_(1/2),crystallization rate depended onthe cooling rate significantiy. With the increase of the cooling rate,the crystallization rate constant and thecrystallinity were increased. Moreover,at the same cooling rate,the crystallization rate of the PVA/nucleat-ing agent composite was larger than modified PVA. This indicated that the addition of nucleating agentcould increase the crystallization rate of the modified PVA and had the effect of heterogeneous nucleation.The Mo Zhishen method could better explain the non-isothermal crystallization process of modified PVA.

关键词(KeyWords)： 改性聚乙烯醇;成核剂;非等温结晶动力学
modified PVA;nucleating agent;non-isothermal crystallization kinetics

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 麻聪,俞昊,段小超,杨通辉
MA Cong,YU Hao,DUAN Xiao-chao,YANG Tong-hui

DOI: 10.16090/j.cnki.hcxw.2017.03.001

参考文献(References)：

• [1]康永.聚乙烯醇改性研究进展[J].乙醛醋酸化工,2015(5):11-17.
• [2]王弼偲,丁长坤,赵渝,等.纳米银改性聚丙烯的非等温结晶动力学研究[J].功能材料,2012(12):1516-1518.
• [3]YANG Z,XU D,LIU J,et al.Fabrication and characterization of poly(vinyl alcohol)/carbon nanotube melt-spinning composites fiber[J].Progress in Natural Science:Materials International,2015,25(5):437-444.
• [4]PENG Z,KONG L X,LI S.Non-isothermal crystallisation kinetics of self-assembled polyvinylalcohol/silica nano-composite[J].Polymer,2005,46(6):1949-1955.
• [5]王雷,陈俊伟,周正发,等.增塑剂改性聚乙烯醇复合材料的非等温结晶动力学研究[J].塑料制造,2012(7):54-56.
• [6]SUKSUT B,SCHLARB A K.Influence of Ti O2nanoparticles on nonisothermal crystallization of PP in a wide range of cooling rates analyzed by fast scanning DSC[J].Journal of Applied Polymer Science,2016,133(37):43944.
• [7]MAGALHAES Da SILVA S P,LIMA P S,OLIVEIRA J M.Non-isothermal crystallization kinetics of cork-polymer composites for injection molding[J].Journal of Applied Polymer Science,2016,133(42):44124.
• [8]王有富,李文刚.改性聚乙烯醇的非等温结晶动力学研究[J].合成纤维工业,2013(5):39-42.
• [9]ZHEN W LU C.Surface modification of thermoplastic poly(vinyl alcohol)/saponitenanocomposites via surface-initiated atom transfer radical polymerization enhanced by air dielectric discharges barrier plasma treatment[J].Applied Surface Science,2012,258(18):6969-6976.
• [10]李建广,颜春,李红周,等.尼龙6/石墨复合材料非等温结晶动力学研究[J].塑料工业,2013(01):67-71.
• [11]KIM D,JUNG J,PARK S,et al.Preparation and characterization of LDPE/PVA blend films filled with glycerin-plasticized polyvinyl alcohol[J].Journal of Applied Polymer Science,2015,132(22):41985.
• [12]黄兆阁,邹晓燕,方立翠.尼龙6/高岭土复合材料的非等温结晶行为研究[J].现代塑料加工应用,2010(5):40-43.