合成纤维

2016, v.45;No.328(06) 9-16

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Archive) | 高级检索(Advanced Search)

氧化石墨烯改性聚乙烯醇纤维的制备及性能研究
Preparation and Properties of Polyvinyl Alcohol Fiber Modified with Graphene Oxide

王雪新,胡祖明,于俊荣,诸静,王彦
WANG Xue-xin,HU Zu-ming,YU Jun-rong,ZHU Jing,WANG Yan

摘要(Abstract):

采用凝胶纺丝制备了氧化石墨烯(GO)改性的高强聚乙烯醇(PVA)纤维,研究了GO的含量、纺丝工艺对GO-PVA纤维性能的影响。通过红外光谱、热失重和热失重速率、差示扫描分析、X射线衍射等方法对GO-PVA纤维的结构与性能进行了研究。结果表明:GO-PVA纤维具有更好的拉伸性能,当GO质量分数在0.1%的时候,GO-PVA纤维具有最好的拉伸性能,其最大拉伸倍数、强度和模量分别为41倍、15.6 c N/dtex和185 c N/dtex,比纯PVA纤维提高了36.7%、16.4%和79.6%。
High strength polyvinyl alcohol(PVA) fiber was modified with graphene oxide(GO) and was prepared by gel spinning.The content of GO and gel spinning process were investigated.The structure and properties were investigated by SEM,FTIR,DSC,TG,DTG and XRD analysis.The results showed that the modified fiber had better tensile properties.When the content of GO was 0.1%,the properties of the GO-PVA fiber were the best,the maximum draw ratio,the tensile strength and modulus reached 41,15.6 cN/dtex and 185 cN/dtex,which compared with neat PVA fiber,increased by 36.7%,16.4%and 79.6%,respectively.

关键词(KeyWords): 聚乙烯醇;高强高模纤维;氧化石墨烯;凝胶纺丝;改性
polyvinyl alcohol;high strength and high modulus fiber;graphene oxide;gel spinning;modification

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 王雪新,胡祖明,于俊荣,诸静,王彦
WANG Xue-xin,HU Zu-ming,YU Jun-rong,ZHU Jing,WANG Yan

DOI: 10.16090/j.cnki.hcxw.2016.06.003

参考文献(References):

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享