柔性聚乳酸基立体打印服装面料设计Design of 3D Printing Clothing Fabric Based on Fxible Polyactic Acid
张紫阳,孟家光,薛涛,杨豆豆,徐晨光
ZHANG Zi-yang,MENG Jia-guang,XUE Tao,YANG Dou-dou,XU Chen-guang
摘要(Abstract)：
以柔性聚乳酸(PLA)为打印材料,利用熔融沉积成型技术进行3D打印服装面料设计,通过傅里叶红外光谱、X射线衍射仪和扫描电镜对打印前后柔性PLA的分子结构、结晶度、表面形貌进行表征。结果表明:喷丝前后PLA细丝的分子结构没有变化,结晶度有所下降,经熔融喷丝后的PLA细丝表面更加光滑,喷丝连续均匀。以3D Max建模软件为平台,采用Peirce模型理论,结合NURBS曲线建模方法,建立平纹组织3D打印模型,得到立体打印服装面料。
Using flexible polylactic acid(PLA) as the printing material, the design of 3D printing clothing fabric is carried out by using melt deposition molding technology. The molecular structure, crystallization and surface appearance of flexible PLA before and after printing are characterized by Fourier infrared spectroscopy, X-ray diffractioninstrument and scanning electroscope. The results show that the molecular structure of PLA filament before and after spinning doesn't change, the crystallization decrease, the surface of PLA filament after melt spinning is smoother, and the filament is continuously uniform. Based on 3D Max modeling software, Peirce model theory and NURBS curve modeling method are used to establish a flatprinted tissue 3D printing model and the three-dimensional printing clothing fabric is obtained.
关键词(KeyWords)：
柔性聚乳酸;立体打印;服装面料;面料组织建模
flexible polylactic acid;3D printing;clothing fabric;fabric tissue modeling
基金项目(Foundation): 国家支撑计划项目(2012BAF13B03);; 陕西省科技统筹创新工程项目(2014SZS13-Z01)
作者(Author):
张紫阳,孟家光,薛涛,杨豆豆,徐晨光
ZHANG Zi-yang,MENG Jia-guang,XUE Tao,YANG Dou-dou,XU Chen-guang
DOI: 10.16090/j.cnki.hcxw.2021.08.012
参考文献(References)：
- [1]张秀萍,梁杰. 3D打印技术及应用趋势[J].现代制造技术与装备,2015(3):85-87.
- [2]卫保卫,王爱娣,张嘉敏,等.基于3D打印技术的服装个性定制产业发展研究[J].科技风, 2018(4):181, 188.
- [3]张闪.浅析3D打印技术在服装中的应用[J].国际纺织导报, 2014, 42(2):59-60, 64.
- [4]高阳.三维打印技术在产品设计中的应用研究[D].北京:北京工业大学, 2012.
- [5]王忠宏,李扬帆,张曼茵.中国3D打印产业的现状及发展思路[J].经济纵横, 2013(1):90-93.
- [6]程燕婷,孟家光,支超.以柔性聚乳酸为材料的织物组织立体打印参数设计[J].纺织学报, 2018, 39(5):38-42.
- [7]王彦云. FDM成形工艺支撑自动生成技术研究[D].太原:中北大学, 2016:3-4.
- [8]罗枝伟,李正全,柳亚玲,等.傅里叶变换衰减全反射红外光谱分析塑料的润滑剂[J].广东化工, 2019, 46(24):24-25.
- [9]陆金生,吴庆春.铝电解质中阳极残渣(碳)浓度的XRD法测定[J].物理测试, 2017, 35(2):27-30.
- [10]王亚慧.后处理对改性PLLA/PDLA纤维性能的影响[D].武汉:武汉纺织大学, 2018.
- [11]徐婷婷. PLLA/PDLA共混熔融纺丝及后处理的研究[D].上海:东华大学, 2013.
- [12]李昌玉,张瑞林,尹华. 3DS MAX中通过NURBS曲线实现方格织物的三维结构模拟[J].工业控制计算机, 2012, 25(1):73-74, 76.
- [13]程燕婷,孟家光,支超.立体打印机织物基本组织[J].合成纤维,2018, 47(1):41-44.
- [14]蔡雨.机织物几何结构的测量与重建及Peirce机织物几何结构模型验证的研究[D].郑州:中原工学院, 2011.