段菊兰,滕翠青,韩克清,余木火
DUAN Ju-lan, TENG Cui-qing, HAN Ke-qing, YU Mu-huo (State Key Laboratory for Modification of Chemical Fibers and Polymer Materials

• 1:纤维材料改性国家重点实验室
• 2:东华大学材料科学与工程学院

摘要(Abstract)：

提出了采用复合纺丝法制备瓣状光纤的方法。在纺丝组件设计中,将纤芯和高折射率瓣作为整体来控制光纤截面;根据大尺寸光纤冷却要求对现有熔融复合纺丝冷却系统进行改进;由于光纤比较脆,采用了大尺寸的导丝盘和卷绕筒。采用聚碳酸酯和聚甲基丙烯酸甲酯成功地制备了截面符合设计要求的聚合物瓣状光纤。
Fabrication of segmented cladding fiber was proposed in this article. In the new designed spin pack, it considered the high refractive component of cladding and core as a whole part to control the cross-section of fiber. Quenching system in current bicomponent melting spinning was modified according to the requirement for quenching fiber of large size. Due to the brittleness of fiber, the godet and wingding rollers with large diameter were used. The polymer segmented cladding fiber with required cross-section was successfully fabricated using polycarbonate and polymethyl methacrylate.

关键词(KeyWords)： 复合纺丝法;瓣状光纤;纺丝组件
bicomponent spinning, segmented cladding fiber, spin pack

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 段菊兰,滕翠青,韩克清,余木火
DUAN Ju-lan, TENG Cui-qing, HAN Ke-qing, YU Mu-huo (State Key Laboratory for Modification of Chemical Fibers and Polymer Materials

参考文献(References)：

• [1]Rastogi V,Chiang K S.Propagation characteristics of a segmented cladding fiber[J].Opt Lett,2001,26:491-493.
• [2]Yeung A,Chiang K S,et al.Experimental demonstration of single-mode operation of large-core segmented cladding fiber[C].Optical Fiber Communication Conference,Los Angeles,USA.2004.