王立岩,郭静,陈延明,陈颖,邹妍
WANG Li-yan1, GUO Jing 2, CHEN Yan-ming1, CHEN Ying3, ZOU Yan3 (1. School of Petrochemical Engineering of Shenyang University of Technology

• 1:沈阳工业大学石油化工学院
• 2:大连工业大学化工与材料学院
• 3:沈阳工业大学石油化工学院
• 4:辽阳石化分公司研究院

摘要(Abstract)：

采用原位插层聚合法,制备了蒙脱土含量较高的共聚酯/蒙脱土纳米复合材料,意在做母料使用,含有该母料的聚合物复合材料的染色性能、吸湿浸润性能、抗静电性能及抗紫外性能等都有所改善。阐述了合适的共聚酯/蒙脱土纳米复合材料的制备工艺,讨论了制备过程中的影响因素,结果发现:在采用酯交换-缩聚反应釜进行原位插层聚合制备共聚酯/蒙脱土纳米复合材料的过程中,蒙脱土在缩聚釜中加入更符合生产实际;缩聚反应的实际过程证明了蒙脱土中含有的金属离子对缩聚反应有催化作用;另外,控制聚合的最终温度不超过278℃。最后,对共聚酯/蒙脱土纳米复合材料的结构进行了表征。
In this thesis, copolyester/montmorillonite nanocomposites were prepared via in situ intercalative polymerization method with a big mass fraction montmorillonite, which attended to be used as parent material. And the properties of dyeability, water absorbability, static resistance, the ultraviolet resistance of the polymer composites containing the parent material would be proved. Appropriate copolyester/montmorillonite nanocomposites preparing prcocess was elaborated, and the influence factors in the preparing process were discussed. It had been found that in the process of preparing copolyester/montmorillonite composites via in situ intercalative polymerization by ester-interchange-condensation reactor, adding montmorillonite to condensation reactor was more conformable to the production fact, the practical process of condensation reaction had proved that the metal ions of montmorillonite had catalytic action for the condesation reaction, what's more, the ultimate temperature of condensation should be controlled below 278 ℃. The structure of copolyester/montmorillonite nanocomposites was characterized.

关键词(KeyWords)： 原位插层聚合;共聚酯;蒙脱土;复合材料
in situ intercalative polymerization, copolyester, montmorillonite, composites

Abstract:

Keywords:

基金项目(Foundation): 辽宁省教育厅青年基金项目(052308)。

作者(Author): 王立岩,郭静,陈延明,陈颖,邹妍
WANG Li-yan1, GUO Jing 2, CHEN Yan-ming1, CHEN Ying3, ZOU Yan3 (1. School of Petrochemical Engineering of Shenyang University of Technology

参考文献(References)：

• [1]Okada A,Kawasumi M,Kurauchi T,et al.Synthesis and characteriza-tion of a nylon6-clay hybrid[J].Polym Pret,1987,28(2):447-448.
• [2]戈明亮,徐卫兵.聚合物/蒙脱土纳米复合材料的制备与表征[J].石化技术与应用,2003,(1):58-62.
• [3]刘增君,陈克权等.原位聚合法制备对苯二甲酸丙二醇酯/蒙脱土复合材料及其表征[J].中国塑料,2003,(11):24-27.
• [4]王珂,朱湛等.有机蒙脱土的制备及其结构表征[J].北京理工大学学报,2002,(2):240-243.
• [5]钟海庆.红外光谱法入门[M].北京:化学工业出版社,1984.118-132.