薛芳峰,胡永笑,付洪波,王洪斌
XUE Fang-feng,HU Yong-xiao, FU Hong-bo, WANG Hong-bin (Junma Tyre Cord Co Ltd.

• 1:骏马化纤股份有限公司

摘要(Abstract)：

在锦纶6(PA6)切片中加入一定数量聚酯(PET)切片进行熔融共混纺丝,主要过程包括配料、熔融、纺丝、侧吹风冷却、上油、拉伸、卷绕成型,获得锦涤FDY工业丝。经测试锦涤工业丝的断裂强度为8.0～8.5cN/dtex,断裂伸长为15%～17%。
PA6 chips and a small amount of PET chips were blend spinning. The process included blending, melting, spinning, cooling, oilling, drawing and winding. The results of the measurements showed that the strength and elongation at break of the PA6/PET FDY were 8.0～8.5 cN/dtex and 15 %～17 % respectively.

关键词(KeyWords)： 聚酯;锦纶6;共混;纺丝工艺
PET, PA6, blending, spinning

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 薛芳峰,胡永笑,付洪波,王洪斌
XUE Fang-feng,HU Yong-xiao, FU Hong-bo, WANG Hong-bin (Junma Tyre Cord Co Ltd.

参考文献(References)：

• [1]董纪震,赵耀明,陈雪英等.合成纤维工艺学(下册)[M].第2版.北京:纺织工业出版社,1993:237
• [2]邬国铭,李光等.高分子材料加工工艺学[M].北京:中国纺织出版社,2000:77.
• [3]张瑞志,徐德增,刘维锦等.高分子材料加工设备[M].北京:中国纺织出版社,1999:46.