尚娜,王学利,俞建勇
SHANG Na,WANG Xue-li,YU Jian-yong

• 1:东华大学纺织学院
• 2:东华大学研究院

摘要(Abstract)：

借助热分析技术和毛细管流变仪,分别对两种全消光聚己内酰胺纺丝切片的热学性能和流变性能进行了研究和分析,旨在为熔融纺丝生产工艺控制提供一定的理论依据。结果表明:两种切片在纺丝温度范围内热降解程度均可满足正常纺丝,A公司的切片较易发生结晶;剪切速率越大,熔体受温度的影响越小,稳定性越好;在相同剪切速率下,A切片的黏流活化能较B切片的高,表观黏度对温度的依赖性大。
The thermal and rheological properties of two different full-dull polycaprolactam chips were stud.ied by thermal analysis techniques and capillary rheometer, which aimed to provide a theoretical basis for melt-spinning process controlling in industry. The results showed that thermal degradation degree of two chips in spinning temperature range could satisfy the normal spinning. Chip from A company crystallized more easily. When extension strain rate increased, polycaprolactam melt property was less influenced by temperature and melt stability got better. The viscous activation energy of A chip was higher than B chip in the same extension strain rate, which demonstrated that the apparent viscosity of A chip were more reli.ant on temperature.

关键词(KeyWords)： 聚己内酰胺切片;热学性能;流变性能;纺丝
polycaprolactam chip,thermal property,rheological property,spinning

Abstract:

Keywords:

基金项目(Foundation): 国家科技支撑计划“尼龙6功能性纤维纺织染整关键技术(2013BAE01B02)”

作者(Author): 尚娜,王学利,俞建勇
SHANG Na,WANG Xue-li,YU Jian-yong

DOI: 10.16090/j.cnki.hcxw.2014.06.002

参考文献(References)：

• [1]张红,刘鸿.热分析技术在高分子材料研究中的应用[J].广州化工,2001(4):39-42.
• [2]王建平,范瑛.改性聚酯的热性能[J].合成纤维,1998,27(2):7-12.
• [3]田共有,苗蓉丽,肖亚洲.热分析技术在区分常用聚酰胺材料中的应用[J].理化检验(物理分册),2009(1):29-30.
• [4]陈国康,顾利霞.聚对苯二甲酸丙二醇酯树脂的流变特性研究[J].高分子材料科学与工程,2001(4):94-97.
• [5]刘民英,赵清香,王玉东,杨华,李相魁.PF-Ⅱ聚酰胺流变行为研究[J].高分子材料科学与工程,1997(2):130-132.
• [6]董纪震等编.合成纤维生产工艺学(上册)[M].纺织工业出版社,1993.
• [7]朱仲祺,庄银凤,罗建卿.共聚酰胺6/66/1010的流变性能研究[J].高分子材料科学与工程,1996(1):106-109.
• [8]符若文,李谷,冯开才编.高分子物理[M].化学工业出版社,2005.
• [9]Wilkes G L.An overview of the basic rheological behavior of polymer fluids with an emphasis on polymer melts[J].Journal of Chemical Educa.tion,1981,58(11):880.
• [10]李邵波,秦艳分,沈金科,等.聚(丁二酸乙二酯-共-对苯二甲酸乙二酯)的流变性能[J].合成纤维,2012,41(9):19-22.