聚甲醛的熔融纺丝温度Studies on Spinning Temperature of Polyoxymethylene
王焕莲,兰建武,刘波,王新雷
WANG Huan-lian,LAN Jian-wu,LIU Bo,WANG Xin-lei(Collage of Leather & Textile & Food Engineering
摘要(Abstract)：
通过熔融指数测定、红外光谱分析、重均相对分子质量测定、DSC测试分析了纺丝温度对聚甲醛(POM)流动性、热降解性的影响以及对POM纤维机械性能的影响,从而探讨出聚甲醛的最佳纺丝温度。结果表明:聚甲醛在高温下主要发生热氧降解,随着纺丝温度的升高,POM热降解速度加快,导致相对分子质量降低,熔点下降;POM的最佳纺丝温度在200℃,在此温度制备出的POM纤维强度达6.1cN/dtex。
Through analysis of melt index(MI),infrared spectrum,weight average molecular weight,DSC,the influence of spinning temperature on fluidity,thermal degradation and mechanical properties of polyoxymethylene(POM)were studied.The results showed that with increasing spinning temperature,the POM degraded quickly and its molecular weight and melting point went down,200 ℃ was the best spinning temperature for POM and fiber mechanical properties reached more than 6.1 cN/dtex.
关键词(KeyWords)：
聚甲醛;热分解;熔融纺丝;纺丝温度
polyoxymethylene,thermal degradation,melt spinning,spinning temperature
基金项目(Foundation):
作者(Author):
王焕莲,兰建武,刘波,王新雷
WANG Huan-lian,LAN Jian-wu,LIU Bo,WANG Xin-lei(Collage of Leather & Textile & Food Engineering
参考文献(References)：
- [1]H Benabdallah,D Olender.Finite element simulation of the wear of polyoxymethylene in pin-on-disc-configuration[J].Wear,2000,261:1213-1224
- [2]Takeo Suzumori,Misuo Nakagawa.Method of stabilizing polyoxymethylene copolymer:US,4814424[P].1989.
- [3]刘莉.聚甲醛的一个新的应用领域——纺织综丝[J].塑料工业,2008,36(2):71-73.
- [4]Albert G.Willians.Process for preparing high tenacity polyoxymethylene fibers:US,3536219[P].1969.
- [5]Harald Cherdron.Polyoxymethylene fibrids:A process for their production and their use:US,4493751[P].1985.
- [6]鞠谷雄士,大川秀俊.聚甲醛纤维及其制造方法:中国,CN02818234.0[P].2002.
- [7]Kikutani,et al.Polyoxymethylene fiber and method for production thereof:US,6818294B2[P].2004.
- [8]李惠林,段怡飞.聚甲醛等温热降解[J].四川大学学报:工程科学版,2005,37(4):65-68.
- [9]陈炜,邹文樵,冯仰婕.聚甲醛的热降解研究[J].应用科学学报,1992,10(4):365-366.
- [10]任显诚,蔡绪福,赵红军等.光屏蔽剂对聚甲醛老化过程结构与性能的影响[J].四川大学学报:工程版,2007,39(3):108-112.
- [11]中国科学院吉林应用化学研究所.聚甲醛[M].北京:燃料化学工业出版社,1973.