安月绵;罗晓骏;李晨;丁庆华;李智;李乔;
AN Yue-mian;LUO Xiao-jun;LI Chen;DING Qing-hua;LI Zhi;LI Qiao;Suzhou Shenghong Fiber Co., Ltd.;Suzhou Suzhen Bioengineering Co., Ltd.;Jiangsu Zhonglu Technology Development Co., Ltd.;

• 1:苏州盛虹纤维有限公司
• 2:苏州苏震生物工程有限公司
• 3:江苏中鲈科技发展股份有限公司

摘要(Abstract)：

盛虹纤维聚酯二车间因设计和建设时间比较早，部分传统工艺流程耗能较高，在直纺工艺的熔体输送管段，对热媒工艺流程实施优化改造，增加冷媒的使用，隔断热媒散热器，可减少高温一次热媒用量，起到平稳控制热媒系统和节能降耗的目的。
Due to the early design and construction time of Shenghong Fiber Polyester Workshop Ⅱ, some traditional technological processes have high energy consumption. In the melt conveying pipe section of the direct spinning process, the heat medium process has been optimized and modified. By increasing the use of refrigerant and cutting off the heat medium radiator, the consumption of primary heat medium at high temperature can be reduced, and the purpose of stable control of heat medium system and energy saving and consumption reduction can be achieved.

关键词(KeyWords)： 聚酯;熔体输送;热媒;散热;节能降耗
polyester;melt conveying;heat medium;heat dissipate;energy saving and consumption reduction

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 安月绵;罗晓骏;李晨;丁庆华;李智;李乔;
AN Yue-mian;LUO Xiao-jun;LI Chen;DING Qing-hua;LI Zhi;LI Qiao;Suzhou Shenghong Fiber Co., Ltd.;Suzhou Suzhen Bioengineering Co., Ltd.;Jiangsu Zhonglu Technology Development Co., Ltd.;

DOI: 10.16090/j.cnki.hcxw.2023.01.017

参考文献(References)：

• [1]卓怀智.直纺工程熔体输送工艺探讨[J].纺织报告, 2019(4):31-34.
• [2]刘相平.聚酯装置热媒系统优化改造[J].聚酯工业, 2020, 33(6):55-57.