张电子
ZHANG Dian-zi

• 1:中国平煤神马集团公司

摘要(Abstract)：

研究了中低旦锦纶66的纺丝条件和工艺控制，如侧吹风风温和风速控制、上油率、热辊温度控制、网络点等，分析聚合物由熔体到丝条冷却成形、牵伸卷绕过程中的内外部转变机制，同时对中低旦锦纶66试验样品进行染色对比，从中探讨纺丝条件和工艺控制对染色均匀性的影响，并选择最佳生产工艺控制标准，提高了中低旦锦纶66的染色均匀性和产品质量。
The spinning conditions and process control of medium and low denier polyamide 66 fiber were studied, such as side blowing air temperature and wind speed control, oiling rate, hot roll temperature control, network point, etc., the internal and external transformation mechanism of polymer from melt to filament in the process of cooling, forming, drawing and winding was analyzed. At the same time, the experiment sample of medium and low denier polyamide 66 fiber was dyed and compared, the influence of spinning conditions and process control on dyeing uniformity was discussed, and the optimal production process control standard was selected to improve the dyeing uniformity and product quality of medium and low denier polyamide 66 fiber.

关键词(KeyWords)： 中低旦锦纶66;侧吹风;网络点;牵伸温度;染色均匀性
medium and low denier polyamide 66 fiber;side blowing air;network degree;drawing temperature;dyeing uniformity

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 张电子
ZHANG Dian-zi

DOI: 10.16090/j.cnki.hcxw.2022.06.010

参考文献(References)：

• [1]吕文娟,张民庆,张会云.纺丝工艺对尼龙66低旦丝染色均匀性的影响[J].合成纤维, 2007, 36(10):43-45.
• [2]王延伟,辛长征.化学纤维加工原理(下册)[M].兰州:甘肃文化出版社, 2005.