郑正举,刑小伟,庄兆伟,卢年春,陈国刚
ZHENG Zheng-ju,XING Xiao-wei,ZHUANG Zhao-wei,LU Nian-chun,CHEN Guo-gang

• 1:浙江盛元化纤有限公司

摘要(Abstract)：

采用熔体直纺工艺路线,在引进的日本TMT Ati-MR/24"双胞胎"卷绕设备上,通过优化生产工艺条件,探索不同工艺条件对纤维性能和异形度的影响,成功研制出83 dtex/72 f有光细旦扁平纤维。该产品具有异形度高、后加工织物毛感丰厚、手感细腻爽滑等优点,深受市场喜爱。
Adopting the melt spinning process and advanced Japanese TMT Ati-MR/24 twin winding equip-ment, by optimizing the production process conditions, exploring the effects on the performance and shapeddegree under different processing conditions, 83 dtex/72 f fine denier flat fiber was developed successfully.The products had a high degree of profile, fabric wool feeling rich, smooth feel, that were well received bythe market.

关键词(KeyWords)： “双胞胎”卷绕设备;有光;细旦;扁平纤维;异形
twin winding equipment;bright;fine denier;flat fiber;special-shaped

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 郑正举,刑小伟,庄兆伟,卢年春,陈国刚
ZHENG Zheng-ju,XING Xiao-wei,ZHUANG Zhao-wei,LU Nian-chun,CHEN Guo-gang

DOI: 10.16090/j.cnki.hcxw.2017.05.006

参考文献(References)：

• [1]赵春财.熔体直纺涤纶长丝技术及装备的新进展[J].合成纤维,2012,41(11):9-12.
• [2]魏赛男,崔淑玲.纺丝工艺及截面形状对异形纤维性能的影响[J].毛纺科技,2005(11):43-46.
• [3]李国辉.细旦有光三角异形涤纶FDY生产工艺探讨[J].合成技术及应用,2003,18(1):38-40.
• [4]卞光明.直接纺涤纶FDY扁平丝的工艺探讨[J].合成技术与应用,2006,21(2):55-57.
• [5]郭大生,王文科.聚酯纤维工程科学与工程[M].北京:中国纺织出版社,2001:3.
• [6]李雪梅,薛孝川,罗丽珊.功能性纤维材料研究进展[J].化纤与纺织技术,2015,44(4):27-32.