合成纤维

2022, v.51;No.401(07) 29-33+39

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Archive) | 高级检索(Advanced Search)

盐津地区玄武岩成纤工艺及其性能研究
Research on Fibrillation Process and Performance of Basalt in Yanjin Area

刘月月,王玥晗,罗理达,刘津,汪庆卫
LIU Yue-yue,WANG Yue-han,LUO Li-da,LIU Jin,WANG Qing-wei

摘要(Abstract):

对盐津地区的玄武岩是否成纤以及成纤后的耐酸碱性能进行了研究,利用X射线能谱仪分析盐津玄武岩纤维的组成,利用电子单纤维强度仪测试纤维的抗拉强度,利用扫描电子显微镜和傅里叶红外光谱仪来表征纤维表面形貌和结构组成,利用X射线衍射仪来研究纤维的晶相结构。结果表明:盐津玄武岩纤维的成纤温度较低,在1 320℃、400 r/min条件下可达到最大流量;未经处理的纤维表面非常光滑,呈现一种近程有序、远程无序的玻璃态状态;单丝抗拉强度接近1 000 MPa;纤维的耐酸性能优于耐碱性能。
Whether the basalt in YanJin area has fiber-forming performance and the acid and alkali resistance performance after fiber-forming were studied. The fiber composition of basalt fiber in Yanjin area was analyzed by X-ray energy dispersive spectrometer, the tensile strength of fiber was measured by electronic single-fiber strength tester, the surface morphology and structure of the fiber were characterized by scanning electron microscope and Fourier transform infrared spectrometer, and the crystal phase structure of the fiber was studied by X-ray diffrotometer. The results show that the fiber-forming temperature of the basalt fiber in Yanjin area is low, and the maximum flow rate can be reached at 1 320 ℃ and 400 r/min; the surface of the untreated fiber is very smooth, showing a kind of glass state with near-range order and long-range disorder; the acid resistance performance of the fiber is better than that of alkali resistance performance.

关键词(KeyWords): 盐津地区;玄武岩纤维;成纤性;耐酸碱性
Yanjin area;basalt fiber;fiber-forming performance;acid and alkali resistance performance

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金面上项目(51873032);; 上海市科委科技创新行动计划(20JC1414900)

作者(Author): 刘月月,王玥晗,罗理达,刘津,汪庆卫
LIU Yue-yue,WANG Yue-han,LUO Li-da,LIU Jin,WANG Qing-wei

DOI: 10.16090/j.cnki.hcxw.2022.07.011

参考文献(References):

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享