任曙霞,罗卫,苏旺飞,黄象安
REN Shu-xia1, LUO Wei1, SU Wang-fei1, HUANG Xiang-an1

• 1:东华大学材料科学与工程学院
• 2:东华大学纤维材料改性国家重点实验室

摘要(Abstract)：

采用差示扫描量热法(DSC)研究了聚对苯二甲酸丙二醇酯/聚乙烯(PTT/PE)共混体系的非等温结晶动力学,通过热台偏光显微镜(POM)对共混物在等温条件下的结晶形态进行了研究。结果发现:PTT/PE共混体系各样品的结晶峰温度随着冷却速率的提高而下降,而半结晶时间t1/2随着冷却速率的提高而提高;结晶动力学常数Zc随着冷却速率的提高而下降,表明共混体系的结晶速率随着冷却速率的提高而降低;在POM观察的时间范围内各样品的球晶尺寸随着时间的延长而增大,PTT/PE(30/70)共混体系在190℃结晶时,球晶尺寸较大,即球晶生长较快。
The non- isothermal crystallization kinetics of PTT/PE blends were studied by using differential scanning calorimetry (DSC) and the crystal morphologies of the blends were studied at isothermal crystallization using polarizing microscope with hot stage (POM). The result showed that the value of the temperature corresponding to the exothermic peak decreased while the half -time of crystallization (t1/2) increased with the cooling rate increasing. The kinetic constant of crystallization (Zc) decreased with the cooling rate increasing. It was also found that the crystallization rate of the blends decreased with the cooling rate increasing. The dimension of spherulites increased with time extended in the POM observations. Compared among different crystallization temperatures, the largest dimension of spherulites was observed at 190 ℃ for PTT/PE (30/70).

关键词(KeyWords)： 聚对苯二甲酸丙二醇酯;聚乙烯;共混;非等温结晶动力学;结晶形态
polytrimethylene terephthalate (PTT), polyethylene(PE), blend, non-isothermal crystallization kinetics, crystal morphology

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 任曙霞,罗卫,苏旺飞,黄象安
REN Shu-xia1, LUO Wei1, SU Wang-fei1, HUANG Xiang-an1

DOI: 10.16090/j.cnki.hcxw.2010.02.004

参考文献(References)：

• [1]李桂娟,齐秀丽,代国兴等.PTT/PET共混体系结晶行为和形态研究[J].中国塑料,19(5):47-50.
• [2]Wu J,Schultz J M,et al.In-situ study of structure development in poly(trimethylene terephthalate)fibers during stretching by simultaneous synchrotron small and wide-angle X-ray scattering[J].Polymer,2001,42:7141-7151.
• [3]Grande J A.Shell's upgraded PTT resin vies in engineering thermoplastics market[J].Mod Plast,1997,12:97.
• [4]Zhang J L.Study of poly(trimethylene terephthalate)as an engineering thermoplastics material[J].J Appl Polym Sci,2004,91(3):1657-1666.
• [5]Jafari S H,Yavari A,Asadinezhad a,et al.Correlation of morphology and rheological response of interfacially modified PTT/m-LLDPF blends with varying extent of modification[J].Polymer,2005,46(14):5082-5093.
• [6]肖雪春,李文刚,黄象安.PET/PTT共混体系的非等温结晶动力学研究[J].合成纤维,2005,34(11):10-13.
• [7]李素花,吴嘉麟.PET/PTT共聚酯的结晶和纺丝性能[J].合成纤维工业,2006,29(4):8-10.
• [8]任秀艳,刘克勤,李桂娟等.PTT/PBT共混体系结晶及晶貌形态的研究[J].长春工业大学学报(自然科学版),2005,26(4):277-279.
• [9]何曼君,陈维孝,董西侠.高分子物理[M].上海:复旦大学出版社,1990:46.
• [10]刘冶球等.聚丙烯-g-聚氨酯共聚物的非等温结晶动力学研究[J].高分子学报,2002,(5):577-581.
• [11]Jeziorny A.Parameters characterizing the kinetics of the non-isothermal crystallization poly(ethylene terephthalate)determined by DSC[J].Polymer,1978,19,1142-1144.
• [12]续大义.PET树脂DSC研究[J].合成纤维工业,1993,16(5):28-32.