庄园园,司小娟,陈建军,程丹丹,Jeong Cheol Kim,王依民
ZHUANG Yuan-yuan1, SI Xiao-juan1, CHEN Jian-jun1, CHENG Dan-dan1, JEONG Cheol Kim2, WANG Yi-min3 (1. College of Material Science and Engineering

• 1:东华大学材料科学与工程学院
• 2:韩国工业技术研究院
• 3:纤维材料改性国家重点实验室

摘要(Abstract)：

运用DSC手段研究了UHMWPP/UHMWPE合金纤维的非等温结晶行为。对所得的实验数据用修正Avrami方程的Jeziorny法进行处理,发现随冷却速率的提高,半结晶时间t1/2缩短,表明冷却速率加快时,结晶速率也随之加快;纯UHMWPP主要是以三维球晶的方式进行结晶生长;UHMWPE的加入起到成核剂的作用,随着成核剂含量的增加,UHMWPP的结晶维数将降低。
The kinetics of non-isothermal crystallization of UHMWPP (ultra -high molecular weight polypropylene)/UHMWPE (ultra-high molecular weight polyethylene)composite fiber was studied by means of differential scanning calorimetry (DSC). The modified Avrami theories of Jeziorny was used to analyze the results from DSC. The values of t1/2 showed that crystallization rate increased with the increase of cooling rate. UHMWPE served as nucleating agent to speed the crystallization of the UHMWPP/UHMWPE composite fiber. With the increase of nucleating agent, the tridimensional growth of spherulites changed.

关键词(KeyWords)： 超高相对分子质量聚丙烯;超高相对分子质量聚乙烯;非等温结晶;冷却速率;动力学
UHMWPP, UHMWPE, non-isothermal crystallization, cooling rate, kinetics

Abstract:

Keywords:

基金项目(Foundation): 上海市重点学科资助项目(编号B603)

作者(Author): 庄园园,司小娟,陈建军,程丹丹,Jeong Cheol Kim,王依民
ZHUANG Yuan-yuan1, SI Xiao-juan1, CHEN Jian-jun1, CHENG Dan-dan1, JEONG Cheol Kim2, WANG Yi-min3 (1. College of Material Science and Engineering

参考文献(References)：

• [1]Ivan'kova E,et al.Time-resolved X-ray scattering studies of creep in oriented UHMWPE film[J].Polymer,2006,47(15):5623-5629.
• [2]Kristiansen M,Tervoort T.Synergistic gelation of solutions of isotactic polypropylene and bis-(3,4-dimethyl benzylidene)sorbitol and its use in gel-processing[J].Polymer,2003,44(19):5885-5891.
• [3]Kristiansen M,Tervoort T,Smith P,et al.Mechanical properties of sorbitol-clarified isotactic polypropylene:Influence of additive concentration on polymer structure and yield behaviour[J].Macromolecules,2005,38:10461-10465.
• [4]张跃飞,辛忠.去氢枞酸类成核剂改性聚丙烯的非等温结晶动力学研究[J].功能高分子学报,2003,16(4):431-435.
• [5]Mandelkern L.Crystallization of polymers[M].New York:McGraw-Hill Press,1964:213.
• [6]Zhu X,Yan D.Influence of the order of polymer melt on the crystallization behavior[J].Colloid and Polymer Science,2001,279(6):546-553.
• [7]王峰,张丽叶,张海成.高熔体强度聚丙烯的非等温结晶动力学[J].北京化工大学学报,2003,30(1):48-51.
• [8]窦红静,朱诚身,何素芹等.间规聚丙烯的非等温结晶过程与动力学研究[J].高分子材料科学与工程,2002,18(3):154-157.
• [9]何曼君,陈维孝,董西侠.高分子物理[M].上海:上海复旦大学出版社,1997.
• [10]Ikeda Y,Ohta T.The influence of chain entanglement density on the increases in strength and modulus with ultra-drawing of ultra-high-molecular-weight polypropylene[J].SEN'I GAKKAISHI,2002,58:444-450.
• [11]崔新宇,周晓东,戴干策.玻璃纤维增强聚丙烯结晶动力学研究[J].华东理工大学学报,2001,27(6):639-642.