王军泉,陈惠芳,陈大俊,潘鼎
WANG Jun-quan, CHEN Hui-fang, CHEN Da-jun, Pan Ding(State Key Laboratory for Modification of Chemical Fibers and Polymer Materials

• 1:东华大学材料科学与工程学院 纤维材料改性国家重点实验室
• 2:东华大学材料科学与工程学院
• 3:纤维材料改性国家重点实验室
• 4:东华大学材料科学与工程学院

摘要(Abstract)：

将纳米凹凸棒土(AT)加入聚丙烯腈(PAN)/二甲基亚砜(DMSO)纺丝溶液中,用平板流变仪研究了温度、AT含量对纺丝溶液流变性能的影响。结果表明:随着AT含量的提高,纺丝溶液的表观黏度及结构黏度指数降低,非牛顿指数和粘流活化能增大。
The effects of temperature and the content of attapulgite(AT) on the rheological behavior of PAN/DMSO spinning solution were studied by the rheometric analysis. The increase of AT content would decrease the viscosity of PAN spinning solution and structural viscosity index(Δη), while increase the non-Newtonian index (n) and the viscous flow activation energy (Eη).

关键词(KeyWords)： 凹凸棒土;聚丙烯腈;纺丝溶液;流变行为
attapulgite, polyacrylonitrile, spinning solution, rheological behavior

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金重点项目(50333050);; 国家“973”项目(2006CB606505);; 上海市重大基础研究项目(07DJ14002)

作者(Author): 王军泉,陈惠芳,陈大俊,潘鼎
WANG Jun-quan, CHEN Hui-fang, CHEN Da-jun, Pan Ding(State Key Laboratory for Modification of Chemical Fibers and Polymer Materials

参考文献(References)：

• [1]许登堡,吴叙健.聚丙烯腈基碳纤维原丝[J].广西化纤通讯,2000,(2):19-25.
• [2]贺福,杨永岗.创新是发展我国碳纤维工业的必由之路[J].材料导报,2000,14(11):3-4.
• [3]王成国,朱波,蔡化褴.制约我国碳纤维工业发展的原因分析[J].山东大学学报(工学版),2002,32(6):521-525.
• [4]李爱英,常杰云,王凯全等.超支化聚合物在共混改性中的应用[J].塑料科技,2005,(5):54-58.
• [5]熊忠,陈骁,韩高亮等.纳米CaCO3填充新型聚烯烃弹性体POE的力学、流变性能研究[J].弹性体,2005,15(2):14-18.
• [6]Z Lewandowski.Application of a linear synthetic polymer to improve the properties of cellulose fibers made by the NMMO process[J].J Appl Polym Sci,2002,83:2762-2773.
• [7]L Jiang,Y C Lam,J Zhang.Rheological propertities and interfacial slip of a mutilayer structure under dynamic shear[J].J Poly Sci:Part B:Polym Phys,2005,43:2683-2693.
• [8]W Brostow,T Sterzynski,S Triouleyre.Rheological properties and morphology of binary blends of a longitudinal polymer liquid crystal with engineering polymers[J].Polymer,1996,37(9):1561-1574.
• [9]徐鸿升,李忠明,杨铭波.多组分聚合物的动态流变特性[J].高分子材料科学与工程,2004,20(6):24-28.