合成纤维

2007, No.215(01) 1-4

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Archive) | 高级检索(Advanced Search)

聚乳酸纤维的静电纺丝及其形态结构研究
Preparation and Morphology of Poly (L-lactic acid) Fibers via Electrospinning

葛鹏飞,葛明桥,魏取福,高卫东
GE Peng-fei, GE Ming-qiao, WEI Qu-fu, GAO Wei-dong (Key Laboratory of Science & Technology of Eco-textiles

摘要(Abstract):

采用二氯甲烷为溶剂,以滚筒为收集装置,利用静电纺丝法制备了聚乳酸纳米纤维。分析了溶液体系和滚筒转速对纤维形态结构的影响。结果表明:在质量分数相同的条件下,采用相对分子质量较大的聚乳酸切片所纺纤维直径细而均匀;质量分数增加时,电纺丝产品由一些高分子微/纳米液滴渐变为成形较好、珠状较少的平滑纤维,其平均纤维直径先增加后减小;控制收集滚筒的转速在一定范围内,可以获得排列取向较好的纤维。
Poly(L-lactic acid) nanofibers were prepared via electrospinning by using dichloromethane as a solvent and the rotating cylinder as a collector. The effects of the solution system and the rotating speed of cylinder on the fiber morphology were analysed. The results showed that some thin and uniform fibers were produced using PLLA chips of the high molecular weight under the condition of the same solution concentration. With the increase of the solution concentration, the product of the electrospinning was transformed from some micro/nano macromolecule droplets to some smooth fibers having better forms and less beads. Meanwhile, the average fiber diameter increased firstly then decreased. Some aligned fibers could be obtained by controlling the rotating speed of cylinder in a proper range.

关键词(KeyWords): 静电纺丝;聚乳酸;溶液体系;滚筒转速;形态结构
electrospinning, poly(L-lactic acid), solution system, the rotating speed of cylinder, morphology

Abstract:

Keywords:

基金项目(Foundation): 教育部先进纺织材料与制备技术重点实验室开放基金资助项目,项目编号2005002。

作者(Author): 葛鹏飞,葛明桥,魏取福,高卫东
GE Peng-fei, GE Ming-qiao, WEI Qu-fu, GAO Wei-dong (Key Laboratory of Science & Technology of Eco-textiles

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享