唐波,霍卫星,张游,王瑛,吕永根,吴新锋
TANG Bo,HUO Wei-xing,ZHANG You,WANG Ying,Lü Yong-gen,WU Xin-feng

• 1:东华大学材料科学与工程学院纤维材料改性国家重点实验室
• 2:北京航天发射技术研究所
• 3:上海航天设备制造总厂有限公司上海航天特种环境高分子功能材料工程技术研究中心
• 4:上海海事大学海洋科学与工程学院

摘要(Abstract)：

轻质碳纤维毡以其优越的耐高温性能、高温保温性能、易成型加工性能和低杂质含量而广泛应用于太阳能多晶硅炉、单晶硅炉、半导体炉、蓝宝石炉、拉丝炉、高端冶金热处理炉等高温保温环境。从碳纤维毡的纯度方面入手,对高纯碳纤维毡材料的应用、纯化方法和检测方法进行了概述,特别是对高纯碳纤维毡的物理和化学纯化方法、ICP和GDMS两种元素检测方法进行了介绍,为高纯碳纤维毡的制备、检测和应用提供了一些建议。
Lightweight carbon fiber felt is widely used in solar energy polysilicon furnace, monocrystalline silicon furnace, semiconductor furnace, sapphire furnace, wire drawing furnace, high-end metallurgical heat treatment furnace and other high-temperature insulation environments due to its superior high-temperature resistance, high-temperature insulation performance, easy forming and processing performance and low impurity content. The application, purification methods and detection methods of high purity carbon fiber felt materials are summarized, especially the methods of physical and chemical purification, ICP and GDMS element detection methods. It is hoped that some suggestions for the preparation, test and application of high purity carbon fiber felt can be provided.

关键词(KeyWords)： 碳纤维;碳纤维毡;检测方法;纯化方法
carbon fiber;carbon fiber felt;test method;purification method

Abstract:

Keywords:

基金项目(Foundation): 中国博士后科学基金项目(2017M611757);; 上海市科技人才计划项目(19QB1402200);; 上海市科委“科技创新行动计划”地方院校能力建设项目(19040501800)

作者(Author): 唐波,霍卫星,张游,王瑛,吕永根,吴新锋
TANG Bo,HUO Wei-xing,ZHANG You,WANG Ying,Lü Yong-gen,WU Xin-feng

DOI: 10.16090/j.cnki.hcxw.2020.06.009

参考文献(References)：

• [1] LI C G, XIAN G J. Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air[J]. Journal of Engineered Fibers and Fabrics,2019, 14. DOI:1558925019850010.
• [2] LIU W, GAO Y, LIU X Y, et al. Tensile and interfacial properties of dry-jet wet-spun and wet-spun polyacrylonitrile-based carbon fibers at cryogenic condition[J]. Journal of Engineered Fibers and Fabrics, 2019,14. DOI:1558925019835164.
• [3] AHMED A S, CHLUP Z, DLOUHY I, et al. Mechanical Properties of Low-Density SiC-Coated Carbon-Bonded Carbon Fiber Composites[J].International Journal of Applied Ceramic Technology, 2012, 9:401-412.
• [4] AHMED A S, RAWLINGS R D, ELLACOTT S D, et al. Oxidation and thermal degradation resistance of silicon carbide coated low density carbon-carbon composite[J]. Advances in Applied Ceramics, 2013,112:23-32.
• [5] LI H J, XUE H, FU Q G, et al. Research Status and Prospect of Antioxidation Coatings for Carbon/Carbon Composites[J]. Journal of Inorganic Materials, 2010, 25:337-343.
• [6] PANG W C, WU J L, ZHANG Q F, et al. Graphene oxide enhanced, radiation cross-linked, vitamin E stabilized oxidation resistant UHMWPE with high hardness and tensile properties[J]. Rsc Advances, 2017,7:55536-55546.
• [7] WANG C H, JIN X Y, CHENG H M, et al. Organic aerogel-impregnated low-density carbon/carbon composites:Preparation, properties and response under simulated atmospheric re-entry conditions[J]. Materials&Design, 2017,131:177-185.
• [8] BESSIRE B K, LAHANKAR S A, MINTON T K. Pyrolysis of Phenolic Impregnated Carbon Ablator(PICA)[J]. Acs Applied Materials&Interfaces, 2015, 7:1383-1395.
• [9] NATALI M, PURI I, KENNY J M, et al. Microstructure and ablation behavior of an affordable and reliable nanostructured Phenolic Impregnated Carbon Ablator(PICA)[J]. Polymer Degradation and Stability, 2017,141:84-96.
• [10] BESSIRE B K, MINTON T K. Decomposition of Phenolic Impregnated Carbon Ablator(PICA)as a Function of Temperature and Heating Rate[J]. Acs Applied Materials&Interfaces, 2017, 9:21422-21437.
• [11] WONG H W, PECK J, ASSIF J, et al. Detailed analysis of species production from the pyrolysis of the Phenolic Impregnated Carbon Ablator[J]. Journal of Analytical and Applied Pyrolysis, 2016, 122:258-267.
• [12] RIVIER M, LACHAUD J, CONGEDO P M. Ablative thermal protection system under uncertainties including pyrolysis gas composition. Aerospace Science and Technology, 2019, 84:1059-1069.
• [13]姚艳波,余木火,刘安华.两相沥青前驱体及其碳纤维截面结构调控[J].纺织学报, 2017, 38(5):1-7.
• [14]曾凡龙,潘鼎.两种铵盐催化剂和不同活化工艺对粘胶基活性性碳纤维的影响[J].合成纤维, 2004, 33(2):11-14, 32.
• [15]潘鼎,陈惠芳.高纯度PAN基碳纤维及其原丝的研制[J].中国纺织大学学报, 1993, 19(6):1-9.
• [16]柳传宏,谢柳欣,左继成.氢氧化钡催化合成可发性酚醛树脂的工艺研究[J].辽宁化工, 2020, 49(1):16-18.
• [17] SHARMA R, RAVIKUMAR N L, DASGUPTA K, et al. Advanced Carbon-Carbon Composites:Processing Properties and Applications[M]//Composite Materials. Springer Berlin Heidelberg, 2017.
• [18]任晓聪,张光旭.硫酸-氢氟酸分步法提纯石墨的工艺研究[J].非金属矿, 2017, 40(3):68-70.
• [19]贾静,张英新,童坚,等. ICP-MS法测定高纯石墨中的痕量杂质元素[J].精细化工, 2009(7):51-54.
• [20]杨倩倩,何石,胡月,等.电感耦合等离子体原子发射光谱法测定高纯石墨中9种元素[J].冶金分析, 2016, 36(3):55-59.
• [21]刘欣丽,段太成,韩熠,等.悬浮进样-电感耦合等离子体质谱水溶液校正法测定高纯石墨中的超痕量硼[J].分析化学, 2010, 38(5):693-696.