安红玉,杨建忠,郭昌盛
AN Hong-yu,YANG Jian-zhong,GUO Chang-sheng

• 1:西安工程大学

摘要(Abstract)：

采用静电纺丝方法制备了聚乙烯醇(PVA)纳米纤维,探讨了工艺参数对纳米纤维形貌的影响,并对PVA纳米纤维膜进行热处理,研究了热处理时间与温度对纳米纤维膜力学性能的影响。研究表明:PVA质量分数在6%~10%区间内变化时,可得到直径分布较为均匀的纳米纤维;在其它条件相同时,随纺丝电压的升高,PVA纳米纤维的不匀增大;接收距离的改变对PVA纳米纤维的直径变化影响不大;随PVA质量分数的增加,纳米纤维膜的断裂强度和断裂伸长率逐渐增大;在热处理时间相同时,PVA纳米纤维膜的断裂强度随温度的升高而增大;处理温度相同时,随处理时间的延长,PVA纳米纤维膜的断裂强度变化不大。
Electrospinning was used to prepare polyvinyl alcohol(PVA) nanofibers. The process parameterson the morphology of the nanofibers were discussed. After heat treatment, the effects of heat treatment timeand temperature on mechanical properties of PVA nanofiber membranes were studied. The results show thatwhen the PVA mass fraction ranged from 6% to 10%, the diameter distribution of nanofibers was uniform.With the increase of spinning voltage, the inhomogeneity of PVA nanofibers increased; the change of the re-ceiving distance had little effect on the diameter of PVA nanofibers. The breaking strength increased as theconcentration of the spinning solution increasing. When processed at the same time, the breaking strengthof PVA nanofiber membrane increased with the increase of processing temperature. The tensile strength ofPVA nanofiber had little change with the increase of processing time.

关键词(KeyWords)： 聚乙烯醇;静电纺丝;热处理;力学性能
polyvinyl alcohol;electrospinning;heat treatment;mechanical propertiy

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 安红玉,杨建忠,郭昌盛
AN Hong-yu,YANG Jian-zhong,GUO Chang-sheng

DOI: 10.16090/j.cnki.hcxw.2016.11.013

参考文献(References)：

• [1]刘忠科,雍奎刚.热处理对聚乙烯醇薄膜性能的影响[J].塑料科技,2007,35(6):56-59.
• [2]WANG LC,CHEN XG,Yu LJ,et al.Controlled drug release through carboxymethyl-chitosan/poly(vinyl alcohol)blend films[J].Polymer Engineering&Science,2007,47(9):1373-1379.
• [3]张琳琳,邵丽,崔园园,等.PVA复合材料的研究进展[J].化工新型材料,2010,38(1):8-10.
• [4]张惠珍,刘白玲,罗荣.PVA及其复合材料生物降解研究进展[J].中国科学院研究生院学报,2005,22(6):1-10.
• [5]PILLAY V,SIBANDA W,DANCKWERTS M P.Sequential design of a novel PVA-based crosslinkedethylenic homopolymer for extended drug delivery[J].International Journal of Pharmaceutics,2005,301(1/2):89-101
• [6]刘瑞雪,刘太奇,操彬彬.PVA纳米纤维的水稳定性与夹心净化材料的制备[J].高分子材料科学与工程,2012,28(4):152-155.
• [7]YAMAZAKI S,MATSUNAGA S,HORI K.Photocatalytic degradation of trichloroethylene in waterusing Ti O2pellets[J].Water Research,2001,35(4):1022-1028.
• [8]刘太奇,刘瑞雪,孙雁男,等.静电纺聚乙烯醇/纳米二氧化钛超细纤维的水稳定性[J].高分子材料科学与工程,2013,29(12):98-102.
• [9]KOSKI A,Yim K,SHIVKUMAR S.Effect of molecular weight on fibrous PVA produced byelectrospinning[J].Materials Letters,2004,58(3):493-497.
• [10]FENG J J.The stretching of an electrified non-Newtonian jet:a model for electrospinning[J].Physics of fluids,2002,14(11):3912-3926.
• [11]陈晓军,傅依备,罗顺忠,等.热处理条件对PVA薄膜阻氢性能的影响[J].强激光与粒子束,2003,15(2):167-171.
• [12]DING B,KIM H Y,LEE S C,et al.Preparation and characterization of a nanoscale poly(vinylalcohol)fiber aggregate produced by an electrospinning method[J].Journal of Polymer Science Part B:Polymer Physics,2002,40(13):1261-1268.