聚酯/聚酰胺6中空桔瓣型纺粘复合长丝的裂离机制Discussion on the Splitting Mechanism of PET/PA6 Hollow Orange Profile Spunbonded Composite Filaments
卜义华,封严,宋卫民
BU Yi-hua1,FENG Yan1,SONG Wei-min2(1.School of Textiles
摘要(Abstract)：
概述了中空桔瓣型纺粘双组分复合长丝的生产原理及工艺流程,探讨了聚酯/聚酰胺6(PET/PA6)中空桔瓣型纺粘复合长丝的开纤及裂离机制的研究进展,初步分析了水刺开纤的机制。
The theory and process of the hollow orange profile spunbonded composite filaments was discussed.The progress of splitting mechanism of polyester/polyamide 6(PET/PA6) hollow orange profile spunbonded composite filaments was discussed and the spunlaced splitting mechanism was also analyzed.
关键词(KeyWords)：
双组分纺粘水刺非织造布;超细纤维;界面;开纤
bicomponent spunponded-spunlaced nonwoven,microfiber,interface,splitting
基金项目(Foundation):
作者(Author):
卜义华,封严,宋卫民
BU Yi-hua1,FENG Yan1,SONG Wei-min2(1.School of Textiles
DOI: 10.16090/j.cnki.hcxw.2012.07.005
参考文献(References)：
- [1]成枫,黄有佩.双组分超细纤维纺粘水刺非织造布生产与应用[J].合成纤维,2009,38(8):41-42.
- [2]郭合信,黄有佩.双组分纺粘加水刺超细纤维非织造布的技术与发展[J].非织造布,2007,15(4):12-15.
- [3]梁亮,康卫民,肖水波.双组分纤维在非织造布中的应用[J].化纤与纺织技术,2009,40(1):38-41.
- [4]李娜,高绪珊,童俨,等.涤/锦复合超细纤维结构与性能的关系[J].合成纤维,1999,28(4):8-12.
- [5]Liu Yanbo.Investigation of fiber splitting in side-by-sidebicomponent meltblown nonwoven webs through post treatment[D].Tennessee:University of Tennessee,2004.
- [6]何曼君,张红东,陈维孝.等.高分子物理[M].上海:复旦大学出版社,2011.
- [7]郭英.裂片型复合超细纤维截面形状与剥离性[J].合成纤维工业,1999,22(1):19-20.
- [8]董萌,王汝敏,姚梅.改善聚合物共混材料界面相容性的研究进展[J].涂料涂装与电镀,2006,4(5):15-19.
- [9]S S Voyutskii.The role of diffusion phenomena in polymer-to-polymer adhesion[J].Journal of applied polymer science,1963,7(2):475-491.
- [10]游长江,石小华.溶解度参数预测共混物的相容性[J].高分子材料科学与工程,2001,17(1):162-165.
- [11]J J Bikerman.The science of adhesive joints[J].Journal of appliedpolymer science,1962,62(173):349.
- [12]卢志敏,钱晓明.橘瓣型双组分纺粘非织造布的开纤技术探讨[J].产业用纺织品,2011,29(3):23-26.
- [13]吴人洁.高聚物的表面与界面[M].北京:科学出版社,1998:298.
- [14]殷保璞,靳向煜.超细纤维水刺非织造布的纤维裂离机理及性能[J].东华大学学报:自然科学版,2003,29(3):55-58.