芳纶表面改性研究进展Research Progress of Surface Modification of Aramid Fiber
陈超峰,彭涛,陈辉,王凤德
CHEN Chao-feng1,PENG Tao1,CHEN Hui2,WANG Feng-de1(1.China Bluestar Chengrand Chemical Co.Ltd.
摘要(Abstract):
综述了近几年芳纶表面改性研究的新进展,包括高能物理法中的等离子体处理、超声波处理、γ射线处理,表面涂覆法,化学改性法以及最新的氟化处理法,并讨论了几种处理方法的优缺点和实用性。
The recent research progresses of surface modification of aramid fiber were summarized.Meanwhile,the advantages and disadvantages of several modification methods including plusma treatment,ultrasonic treament,γ ray radiation,surface modification,chemical modification and fluorination treatment were discussed.
关键词(KeyWords):
芳纶;表面改性;等离子体处理;氟化处理
aramid,surface modification,plasma treatment,fluorination treatment
基金项目(Foundation):
作者(Author):
陈超峰,彭涛,陈辉,王凤德
CHEN Chao-feng1,PENG Tao1,CHEN Hui2,WANG Feng-de1(1.China Bluestar Chengrand Chemical Co.Ltd.
DOI: 10.16090/j.cnki.hcxw.2010.11.001
参考文献(References):
- [1]路向辉,王吉贵.芳纶纤维表面处理技术的发展概况[J].塑料工业,2007,35(增刊):84-86.
- [2]J Wang,P Chen,et al.The analysis of Armos fibers reinforced poly(phthalazinone ether sulfone ketone)composite surfaces after oxygenplasma treatment[J].Surface&Coatings Technology,2008,202:4 986-4 991.
- [3]J Wang,P Chen,et al.Surface characteristic of poly(p-phenyleneterephthalamide)fibers with oxygen plasma treatment[J].SurfInterface Anal,2008,40:1 299-1 303.
- [4]王静.芳纶纤维增强可溶性聚芳醚复合材料的制备技术、界面表征及性能研究[D].辽宁大连:大连理工大学,2009.
- [5]J Wang,P Chen,et al.Influence of aging behavior of Armos fiberafter oxygen plasma treatment on its composite interfacial properties[J].Surface&Coatings Technology,2009,203:3 722-3 727.
- [6]M Xi,Y L Li,et al.Surface modification of aramid fiber by air DBDplasma at atmospheric pressure with continuous on-line processing[J].Surface&Coatings Technology,2008,202:6 029-6 033.
- [7]X Chen,L Yao,et al.Plasma penetration depth and mechanicalproperties of atmospheric plasma-treated 3D aramid woven composites[J].Applied Surface Science,2008,255:2 864-2 868.
- [8]宁超,赵帅,李国忠.表面改性芳纶纤维增强水泥砂浆的性能[J].江苏建材,2009,(1):29-30.
- [9]严志云,石虹桥,刘安华,贾德民.芳纶帘线表面处理及环境温度对芳纶帘线/橡胶界面破坏的影响[J].橡胶工业,2009,56(11):693-696.
- [10]F Guo,Z Z Zhang,et al.Effect of plasma treatment of Kevlar fabricon the tribological behavior of Kevlar fabric/phenolic composites[J].Tribology International,2009,42:243-249.
- [11]L Liu,Y D Huang,et al.Ultrasonic treatment of aramid fiber surfaceand its effect on the interface of aramid/epoxy composites[J].AppliedSurface Science,2008,254:2 594-2 599.
- [12]H J Dong,J Wu,et al.The Ultrasound-Based Interfacial Treatmentof Aramid Fiber/Epoxy Composites.Journal of Applied Polymer Science[J].2009,113:1 816-1 821.
- [13]Y H Zhang,Y D Huang,et al.Effects of g-ray radiation grafting onaramid fibers and its composites[J].Applied Surface Science,2008,254:3 153-3 161.
- [14]Y H.Zhang,Y D Huang,L.Liu,L.N.Wu.Surface Modification ofAramid Fibers with g-RayRadiation for Improving Interfacial BondingStrength with Epoxy Resin[J].Journal of Applied Polymer Science,2007,106:2 251-2 262.
- [15]张艳华.γ-射线辐照改性对芳纶纤维及其复合材料性能的影响[D].黑龙江哈尔滨:哈尔滨工业大学,2008.
- [16]申明霞,刘桂.表面处理对芳纶纤维粘合性能的影响[J].橡胶工业,2008,55(7):423-425.
- [17]路向辉,曹继平,史爱娟,陈国辉,王吉贵.表面处理芳纶纤维在丁羟橡胶中的应用[J].火炸药学报,2007,30(1):21-23.
- [18]王杨,李鹏,于运花,隋刚,杨小平.芳纶纤维的磷酸表面处理及其树脂基复合材料界面性能[J].复合材料学报,2007,24(3):7-12.
- [19]Pieter J.de Lange,Peter G.Akker,Edith Mader,S.L.Gao,etc.Controlled interfacial adhesion of Twaron aramid fibres in composites bythe finish formulation[J].Composites Science and Technology,2007,67:2 027-2 035.
- [20]李建,周洲.一种芳纶纤维/环氧树脂复合材料的制备方法:中国,200910048983.5[P].2009-04-09.
- [21]J Maity,C Jacob,et al.Direct fluorination of Twaron fiber and themechanical,thermal and crystallization behaviour of short Twaron fiberreinforced polypropylene composites[J].Composites:Part A,2008,39:825-833.