左婷;李想;陈田娣;桂悦;肖建华;张小杰;
ZUO Ting;LI Xiang;CHEN Tian-di;GUI Yue;XIAO Jian-hua;ZHANG Xiao-jie;School of Material Science and Engineering, Nanchang Hangkong University;School of Chemistry and Chemical Engineering, Shanghai University of Engineering Science;

• 1:南昌航空大学材料科学与工程学院
• 2:上海工程技术大学化学化工学院

摘要(Abstract)：

以玻璃纤维(GF)为填充材料，对热塑性弹性体(TPE)进行共混改性，研究了GF尺寸、用量对TPE/GF复合材料的流变性能、力学性能以及热稳定性能的影响。结果表明：复合材料的流变性能随GF尺寸、用量的增加而下降；在TPE中加入质量分数10%、长度3 mm的GF，可获得较优的力学性能，GF有较好的增强效果；复合材料具有较好的热稳定性，具备可重复加工性，对成本节约和环境保护均具有十分重要的意义。
Thermoplastic elastomer(TPE) was modified with glass fiber(GF) as the filling material. The effects of the size and dosage of GF on rheological properties, mechanical properties and thermal stability of TPE/GF composites were studied. The results show that the rheological properties of the composites decrease with the increase of the size and dosage of GF. When adding GF with the length of 3 mm and mass fraction of 10% into TPE, better mechanical properties can be obtained, and GF has better enhancement effect. The composites has good thermal stability and repeatability, which is very important for cost saving and environmental protection.

关键词(KeyWords)： 热塑性弹性体;玻璃纤维;复合材料;流变性能;力学性能;热稳定性能
thermoplastic elastomer;glass fiber;composites;rheological property;mechanical property;thermal stability

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(52063021);; 博士启动基金(EA202001381)

作者(Authors): 左婷;李想;陈田娣;桂悦;肖建华;张小杰;
ZUO Ting;LI Xiang;CHEN Tian-di;GUI Yue;XIAO Jian-hua;ZHANG Xiao-jie;School of Material Science and Engineering, Nanchang Hangkong University;School of Chemistry and Chemical Engineering, Shanghai University of Engineering Science;

DOI: 10.16090/j.cnki.hcxw.2023.03.005

参考文献(References)：

• [1] SATHISHKUMAR T P, SATHEESHKUMAR S, NAVEEN J. Glass fiber-reinforced polymer composites-a review[J]. Journal of Reinforced Plastics and Composites, 2014, 33(13):1258-1275.
• [2]刘庆辉.玻璃纤维增强尼龙6复合材料性能研究[D].长春:长春工业大学, 2012.
• [3]杨建民,李春忠,张玲,等.螺杆结构及转速对玻璃纤维增强PA66复合材料力学及流变性能的影响[J].高分子材料科学与工程, 2010,26(10):118-121.
• [4]刘箫华,宋伟强,孙东泽,等.玻璃纤维增强尼龙66复合材料的结构改性[J].山东化工, 2021, 50(21):20-21, 23.
• [5]唐帅.低磨耗高性能玻璃纤维增强PA66复合材料的制备及性能研究[J].上海塑料, 2020(1):18-25.
• [6]叶振兴,王欧白,钟绍信,等.高性能玻璃纤维增强PA10T/PA66复合材料研究[J].塑料工业, 2020, 48(5):123-128.
• [7] UNTERWEGER C, BRUEGGEMANN O, FUERST C. Effects of different fibers on the properties of short-fiber-reinforced polypropylene composites[J]. Composites Science and Technology, 2014, 103:49-55.
• [8]孙文博,信春玲,何亚东,等.玻璃纤维增强PBT微发泡工艺对其制品泡孔结构的影响[J].中国塑料, 2022, 36(5):1-7.
• [9] ZHONG W H, LI F, ZHANG Z G, et al. Short fiber reinforced composites for fused deposition modeling[J]. Materials Science&Engineering A,2001, 301(2):125-130.
• [10] NING F D, CONG W L, QIU J J, et al. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling[J]. Composites Part B Engineering, 2015, 80:369-378.
• [11]郝现红,胡国胜,张静婷,等.玻纤含量对PA10T/1010复合材料性能的影响[J].工程塑料应用, 2018, 46(2):31-35.
• [12]曲日华,王立岩,张龙云,等.玻璃纤维增强尼龙66复合材料的结构与性能[J].合成纤维工业, 2020, 43(1):27-31.
• [13] SPONTAK R J, PATEL N P. Thermoplastic elastomers:fundamentals and applications[J]. Current Opinion in Colloid&Interface Science,2000, 5(5-6):333-340.
• [14] AWAL A, RANA M, SAIN M. Thermorheological and mechanical properties of cellulose reinforced PLA bio-composites[J]. Mechanics of Materials, 2015, 80:87-95.
• [15] LIM B Y, POH C S, VOON C H, et al. Rheological and thermal study of chitosan filled thermoplasticelastomer composites[J]. Applied Mechanics and Materials, 2015, 3861(754-755):34-38.
• [16] GRIGORVEVA O P, FAINLEB A M, SHUMSKII V F, et al. The effect of multi-reprocessing on the structure and characteristics of thermoplastic elastomers based on recycled polymers[J]. Polymer Science Series A, 2009, 51(2):216-225.