张兴华,温月芳,杨永岗,刘朗,彭公秋
ZHANG Xing-hua1,2, WEN Yue-fang1, YANG Yong-gang1, LIU Lang1

• 1:中国科学院山西煤炭化学研究所炭材料重点实验室

摘要(Abstract)：

利用双弧狭缝孔形喷丝板,采用干喷湿法纺丝工艺,研究了PAN纺丝液在40～70℃喷丝温度范围内,对中空初生纤维成形与性能的影响。结果表明:喷丝温度对纤维截面的成形、外皮层厚度、异形度、中空度、声速取向等均会产生影响。随喷丝温度的增加,初生纤维外皮层厚度减小,纤维内外沿异形度逐渐降低且差距逐渐增加,中空度与声速取向在低温段降低幅度较大,而在高温段降幅减缓。
PAN hollow nascent fibers were spun by dry-wet spinning process with an arc-segmented spinneret. The effects of spinning temperature from 40 ℃ to 70 ℃ on formation and characteristic of PAN hollow nascent fiber were studied. The experimental results showed the spinneret temperature play significant effects on the cross-section morphology, degree of hollowness, degree of profile and sounding orientation of nascent hollow fibers. The outer tight layer became thinner with the increase of air gap distance. Both profile degree of inner and outer decreased and the value difference became larger with the increasing of spinning temperature. Hollowness degree and sounding orientation decreased faster in low temperature range than high range.

关键词(KeyWords)： 聚丙烯腈;中空纤维;喷丝温度;中空度;异形度
polyacrylonitrile, hollow fiber, spinning temperature, degree of hollowness, degree of profile

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 张兴华,温月芳,杨永岗,刘朗,彭公秋
ZHANG Xing-hua1,2, WEN Yue-fang1, YANG Yong-gang1, LIU Lang1

参考文献(References)：

• [1]Robert L Noland,Timothy D O'Brien.Hollow carbon fibers:US,533865[P].1994-08-16.
• [2]中尾充.中空炭素纤维:日本,特开昭49-86634[P].1974-08-20.
• [3]J.菲古森.中空聚合物纤维纺丝设备和方法:中国香港,96198316.7[P].1998-12-16.
• [4]王茂章,贺福.炭纤维的制造、性质及其应用[M].北京:科学出版社,1984:15.
• [5]米山,弘明.中空炭素纤维的制法:JP,平2-74615[P].1990-03-14.
• [6]邰乐平.纺前注射法生产涤纶有色圆中空纤维初探[J].合成纤维工业,1989,12(1):17-19.
• [7]李春之.用250孔板纺圆中空纤维的生产技术[J].合成纤维.1997,26(1):39-42.
• [8]石颖,朱星明等.熔融纺丝法制备沥青基中空炭纤维[J].炭素技术,1996,(5):5-9.
• [9]C Y Wang,et al.Preparation and microstructure of hollow mesophase pitch-based carbon fibers[J].Carbon,1998,36(12):1749-1754.
• [10]单国荣.丙纶中空异形三维自卷曲纤维的研制[J].金山油化纤,2000,(2):10-14.
• [11]郑权.有色中空涤纶短纤维生产工艺探讨[J].合成技术及应用,2003,18(1):50-52
• [12]Jihua Hao,Haiping Dai.Spinning of cellulose acetae hollow fiber by dry-wet technique of3C-shaped spinneret[J].Journal of Applied Polymer Science,1996,62:129-133.
• [13]袁翔,于伟东.纤维异形度的测量方法[J].合成纤维,1992,21(4):46-50,61.
• [14]王光洪,金熹高.数字式纤维声速取向度测量仪的研制[J].现代仪器,2006,12(4):52-55.
• [15]Syang-Peng Rwei.Formation of hollow fibers in the melt-spinning process[J].Journal of Applied Polymer Science,2001,82:2896-2902.