李红杰
LI Hong-jie

• 1:上海市纺织工业技术监督所

摘要(Abstract)：

通过广泛研究国内外的相关测试方法,在充分考虑了各类化纤浸胶帘子线特性的基础上,对浸胶帘子线的多个测试项目确定合理、统一的测试条件,开发制定了国家标准GB/T 36020—2018:研究开发了芳纶浸胶帘子线以及锦纶与芳纶并捻浸胶帘子线的附胶量测试方法;统一了胶料配方,确定了5种制样规格,确定了黏合强力测试条件,并在国内外首次为芳纶提供一整套的黏合强力测试方法;明确了干热收缩率的两种测试方法的条件,改进了常规操作方法烘箱法的条件;最大程度确认了标准适用范围,统一了捻度、直径的测试条件;提供了线密度的全面测试方法。
Through extensive investigation and research at home and abroad, on the basis of fully considering the characteristics of various chemical fiber dipped cord, reasonable and unified testing conditions are determined for several test items of dipped cord. The test methods of dip solids pickup for para aramid dipped cord and polyamide/para aramid twisted dipped cord were studied. The rubber recipe of the test method for static adhesion to textile cord was unified. Five kinds of sample specifications and testing conditions of static adhesion to textile cord were determined. Moreover, for the first time at home and abroad, the test methods of static adhesion to textile cord for para aramid dipped cord were provided. The conditions of two test methods for thermal shrinkage were defined and the conditions of oven method were improved. Maximum scope of the standard was determined. The test conditions of twist and diameter were unitied. A comprehensive test method of line density was provided.

关键词(KeyWords)： 国家标准;化学纤维;芳纶;浸胶帘子线
national standard;man-made fiber;aramid fiber;dipped cord

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 李红杰
LI Hong-jie

DOI: 10.16090/j.cnki.hcxw.2021.01.011

参考文献(References)：

• [1]陈思献.橡胶复合材料用纤维新型环保浸胶体系设计与处理及黏合性能研究[D].北京:北京化工大学, 2018.
• [2]王同英,陈振宝,张清水.轮胎用芳纶帘线的性能研究[J].轮胎工业, 2002, 22(8):476-480.
• [3]刘继涛,张庆,王善元.芳纶帘子线的性能及其黏合问题[J].产业用纺织品, 1998(4):3-5.
• [4]陶敏.高聚物帘线与橡胶的黏合技术[J].橡胶参考资料, 2018, 48(3):44-49.
• [5]张志刚,马晨亮,张慧.纱线强力与拉伸速度的关系分析[J].棉纺织技术, 2012, 40(9):4-6.
• [6]张卫昌,庄苏桔,章于川.浅谈当今常用轮胎帘子线[J].合成纤维,2007, 36(6):12-16.