韦鑫,沈兰萍
WEI Xin,SHEN Lan-ping

• 1:西安工程大学纺织与材料学院

摘要(Abstract)：

根据机织的特点,通过减少织物层数和接结纱数量两种方式进行结构设计,实现单面和双面厚度方向的变化,并对小样织机进行部分改造,实现了更多层数的变化。结果表明:通过减少织物层数的方式实现的厚度变化与通过减少接结纱数量实现的厚度变化相比,前者厚度更厚并且厚度变化更明显。
According to the characteristics of woven, by reducing the number of fabric layers and reducingthe binder yarns to design the structure, the gradient thickness in single-sided and double-sided of thethickness direction was achieved. Sample loom was partial transfored and the change in more layers was got.The results showed that compared the way of reducing the number of fabric layers to achieve the thicknessvariation with the way of reducing the amount of the binder yarn, the former's thickness was more thick andthe thickness variation was more obvious.

关键词(KeyWords)： 三维机织物;厚度;织物层数;接结纱数量
three-dimensional woven fabric;thickness;the number of fabric layers;the number of binder yarns

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 韦鑫,沈兰萍
WEI Xin,SHEN Lan-ping

DOI: 10.16090/j.cnki.hcxw.2016.11.016

参考文献(References)：

• [1]祝成炎.渐变形截面立体机织结构及其复合材料[C]//中国复合材料学会.中国复合材料学会2004年年会论,2004:3.
• [2]WHITNEY T J,CHOU T W.Modeling of 3D angle-interlock textile structure composite[J].Journal of Composite Material,1989,23(9):890-911.
• [3]祝成炎,田伟,申小宏.纵向变截面立体机织结构与组织设计[J].浙江工程学院学报,2003(2):21-24.
• [4]祝成炎,田伟,申小宏.横向变截面立体机织结构及其组织设计[J].浙江工程学院学报,2003(3):6-9.
• [5]曾文敏.连续变厚度平面板状三维机织物的研制[D].上海:东华大学,2015.