蔡晓芬;王国良;王海英;冯新梅;张国仙;
CAI Xiao-fen;WANG Guo-liang;WANG Hai-ying;FENG Xin-mei;ZHANG Guo-xian;Zhejiang Hengsheng Chemical Fiber Co., Ltd.,Tongkun Group;

• 1:桐昆集团浙江恒盛化纤有限公司

摘要(Abstract)：

在预取向丝(POY)切片纺装置上采用熔融纺丝工艺路线，通过在线添加一定比例的特黑母粒，成功研制430 dtex/288f特黑高孔数涤纶POY。利用TMT设备的优势，通过对干燥、过滤材质、油嘴、冷却以及卷绕角等一系列工艺参数的探讨，确定了430 dtex/288f特黑高孔数涤纶POY的生产工艺。采用该生产工艺制得的产品品质可控，外观和性能指标均满足客户要求。
The 430 dtex/288 f extra black and multiporous pre-oriented polyester yarn(POY) was successfully prepared by using melt spinning process in a POY slicing machine and adding a certain proportion of extra black masterbatch online. Based on the advantages of TMT equipment, the production process of430 dtex/288 f extra black and multiporous polyester POY was determined through a series of technological discussion on drying, filter material, nozzle, cooling and winding angle, etc. The quality of the products produced by this production process is controllable, and the appearance and performance indicators meet the requirements of customers.

关键词(KeyWords)： 涤纶POY;熔融纺丝;在线添加;特黑
polyester POY;melt spinning;online addition;extra black

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 蔡晓芬;王国良;王海英;冯新梅;张国仙;
CAI Xiao-fen;WANG Guo-liang;WANG Hai-ying;FENG Xin-mei;ZHANG Guo-xian;Zhejiang Hengsheng Chemical Fiber Co., Ltd.,Tongkun Group;

DOI: 10.16090/j.cnki.hcxw.2023.03.012

参考文献(References)：

• [1]吴金亮,王铁军,张逢书,等.熔体直纺100 dtex/144 f特黑涤纶全拉伸丝的工艺探讨[J].合成纤维, 2020, 49(10):8-11,53.
• [2]邢亚均,付昌飞,顾进.原液着色特黑超细纤维的纺丝工艺[J].合成纤维, 2020, 49(5):16-19.
• [3]李圣军,卢新宇,柳恩,等.特黑140 dtex/144 f涤纶预取向丝制备工艺[J].合成纤维, 2020, 49(9):3-5.
• [4]戚黎洲,杨银仙,张尚垛,等.熔体直纺扁平280 dtex/288 f涤纶预取向丝生产工艺探讨[J].合成纤维, 2021, 50(9):8-11.
• [5]王春燕,赵宝东,张玉勤,等. 576 f多孔涤纶预取向丝的生产工艺[J].合成纤维, 2017, 46(12):26-28.