聚丙烯/凹凸棒土复合材料的结晶行为Crystallization Behavior of Polypropylene/Attapulgite Composites
马少君,于贵春,王玉芬,王立岩,丁贵龙
MA Shao-jun1,YU Gui-chun2,WANG Yu-fen2,WANG Li-yan1,2
摘要(Abstract)：
通过双螺杆挤出机熔融共混制备了聚丙烯(PP)/凹凸棒土(ATP)复合材料样品,分别采用偏光显微镜和差示扫描量热仪对其结晶行为进行了研究。研究表明,复合材料样品的偏光显微镜照片呈现球晶所特有的十字消光现象,球晶尺寸与纯PP球晶的尺寸相比有所减小。非等温结晶测试结果表明,复合材料样品的结晶温度随着ATP含量的增加向高温方向移动,而且半结晶期缩短,PP/ATP复合材料的总体结晶速率增加;ATP的加入改变了PP成核的机制,起到了异相成核的作用。随着降温速率的增大,PP及PP/ATP(95/5)复合材料的结晶起始温度和结晶峰值温度均向低温方向移动,半结晶期变短。
Polypropylene(PP)/attapulgite(ATP)composites were prepared in the melt blending method through twin screw extruder,and their crystallization behaviors were respectively studied by polarized light microscope and differential scanning calorimetry.The results showed that the polarized light photo of the composite assumed cross extinct appearance characteristic of spherulites,and the dimensions of the spherulites of PP/ATP composites were smaller than those of PP.The results of non-isothermal crystalline behavior of PP/ATP composites indicated that the crystallization temperature of the composites assumed an gradually increased,the half crystallization time shortened,and the total crystallization rate of PP/ATP composites increased as ATP content increased.The addition of ATP changed the mechanism of nucleation,and acted as heterogeneous nucleating agent.T0 and Tp of PP and PP/ATP composites shifted to lower temperature,and t0.5 shortened as the cooling rate increased.
关键词(KeyWords)：
聚丙烯;凹凸棒土;复合材料;结晶
polypropylene,attapulgite,composite,crystallization
基金项目(Foundation):
作者(Author):
马少君,于贵春,王玉芬,王立岩,丁贵龙
MA Shao-jun1,YU Gui-chun2,WANG Yu-fen2,WANG Li-yan1,2
DOI: 10.16090/j.cnki.hcxw.2011.09.003
参考文献(References)：
- [1]PAN Bing-li,YUE Qun-feng,REN Jun-fang,et al.A study onattapulgite reinforced PA6 composites[J].Polymer Testing,2006,25:384-391.
- [2]郑茂松,王爱勤,詹庚申.凹凸棒石黏土应用研究[M].北京:化学工业出版社,2007:53-58.
- [3]丁永涛.高分子复合材料研究新进展[M].黄河水利出版社,2005:48.
- [4]吕靖.无机/聚合物杂化纳米复合材料的研究综述[J].化工技术与开发,2009,38(5):36-39.
- [5]金日光,华幼卿.高分子物理[M].北京:化学工业出版社,2007:145.