金敬业,杨建忠,秦建彬,金小亮
JIN Jing-ye,YANG Jian-zhong,QIN Jian-bin,JIN Xiao-liang (College of Textiles and Materials

• 1:西安工程大学纺织与材料学院

摘要(Abstract)：

以水溶性聚酯/聚酰胺海岛复合纤维的聚氨酯革基布为研究对象,以其碱处理后失重率和开纤率综合衡量开纤水平,研究碱液质量浓度、处理温度、时间、渗透剂质量浓度、浴比等对开纤的影响,确定合理的开纤工艺;并测试开纤对革基布透气性、断裂强力和刚度的影响。研究表明,碱液质量浓度、时间、温度、渗透剂质量浓度、浴比的增加,均能促进革基布的开纤,前三者影响较大。开纤合理的工艺是:氢氧化钠溶液质量浓度12 g/L,渗透剂质量浓度2 g/L,温度95℃,时间40 min,浴比40∶1。随着开纤率的增加,革基布透气性明显提高,弯曲长度明显下降,断裂强力先减小后增大。
The weight loss ratio and splitting ratio were used to measure the split level of islands-in-sea microfiber PU backing fabric.The influences of sodium hydroxide concentration,time,temperature,osmotic agent concentration and liquor ratio on splitting were studied in order to find optimum process conditions.The investigation also showed that with the increase of the split ratio,air permeability improved well,stiffness decreased obviously,breaking strength first increased and then decreased.

关键词(KeyWords)： 水溶性聚酯;聚酰胺;海岛复合纤维;聚氨酯革基布;开纤率;失重率
COPET,PA,islands-in-sea microfiber,PU substrate of synthetic leather,splitting ratio,weight loss ratio

Abstract:

Keywords:

基金项目(Foundation): 陕西省科技攻关计划项目(2009k06-21)

作者(Author): 金敬业,杨建忠,秦建彬,金小亮
JIN Jing-ye,YANG Jian-zhong,QIN Jian-bin,JIN Xiao-liang (College of Textiles and Materials

DOI: 10.16090/j.cnki.hcxw.2011.08.006

参考文献(References)：

• [1]王平,康青成,范雪荣.涤锦复合细旦丝针织物开纤工艺研究[J].印染,2008,34(7):12-14.
• [2]李志群,施艳秀,郑向红,陈国强.涤锦复合超细纤维开纤工艺的制定[J].针织工业,2010(6):39-40.
• [3]杨友红.海岛纤维聚氨酯合成革基布碱减量新技术的研究[J].产业用纺织品,2009,27(2):23-27.
• [4]陈雄.海岛纤维织物开纤及对染整质量的影响[C].海岛纤维技术与市场研讨会论文集,2003:120-134.
• [5]王凤处.水溶性聚酯切片在新合纤中的应用与技术进展[C].海岛纤维技术与市场研讨会论文集,2003:80-85.
• [6]汪进玉,王华平,陈必梅.涤锦复合纤维的收缩性能研究[J].合成纤维工业,2002,25(5):18-21.