常小斌,李永锋,张琴,莫玉英,陈军华,邓文举
CHANG Xiao-bin,LI Yong-feng,ZHANG Qin,MO Yu-ying,CHEN Jun-hua,DENG Wen-ju

• 1:深圳昊天龙邦复合材料有限公司

摘要(Abstract)：

用对位芳纶短切纤维和对位芳纶沉析纤维制造对位芳纶纸,用扫描电镜对纸面和横断面进行了观察,并测试其基本性能、电性能和热性能;将样品交由客户进行覆铜板制作并进行验证测试。结果表明:国产对位芳纶纸具有良好的浸漆性、力学性能和热性能,而且介电常数与介质损耗因数很低,满足覆铜板应用需求。
The para-aramid paper was made from para-aramid chopped fibers and para-aramid fibrids. Its surface and cross-section were observed by electron microscopy, and the basic properties, electrical properties and thermal properties were tested. The customer performs the copper clad laminate production and performs verification tests. The results show that the domestic para-aramid paper has good varnish,mechanical properties and thermal properties, and the dielectric constant and dielectric loss factor are very low, which can meet the application requirements of copper clad laminates.

关键词(KeyWords)： 对位芳纶纸;力学性能;热性能;介电常数;介质损耗因数;覆铜板
para-aramid paper;mechanical property;thermal property;dielectric constant;dielectric lossfactor;copper clad laminate

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 常小斌,李永锋,张琴,莫玉英,陈军华,邓文举
CHANG Xiao-bin,LI Yong-feng,ZHANG Qin,MO Yu-ying,CHEN Jun-hua,DENG Wen-ju

DOI: 10.16090/j.cnki.hcxw.2019.09.005

参考文献(References)：

• [1]AMAMI Kazuyoshi,YUHAKU S,SHIRAISHI T,et al.MCM-ALIVHusing SBB flip-chip bonding technique[C]//Proceedings of the 1997 International Symposium on Microelectronics,SPIE,1997,3235(1):278-283.
• [2]ANDOH D,TOMITA Y,NAKAMURA T,et al.The progress of the ALIVH substrate[C]//Electronic Components and Technology Conference,IEEE,2002:1419-1424.
• [3]尤秀兰,刘兆峰.对位芳纶的发展动态及我国实施产业化的基本思路[J].纺织导报,2007(9):91-94.
• [4]杜杨,王宜,贾德民,等.高性能印制电路板用聚芳酰胺纤维纸的研究进展[J].绝缘材料,2006,39(3):18-22.