黄凯,程嘉祺,张金德
HUANG Kai1; CHENG Jia-qi2; ZHANG Jin-de3(1. Reiter Textile Machinery Co.;

• 1:立达纺织机械(上海)有限公司
• 2:苏州大学材料学院
• 3:无锡太极实业股份有限公司 上海200336
• 4:苏州215021

摘要(Abstract)：

用生产普通型聚酯工业丝的设备,在工业化生产的条件下,生产具有良好尺寸稳定性的高性能聚酯工业丝。对生产过程中的固相缩聚切片黏度控制、喷丝板的选择、喷丝头拉伸、拉伸和定型等工艺进行了较为系统的试验优化,探索总结出了较为理想的解决方案,并成功生产了定负荷伸长(4.0cN/dtex)达5%左右、干热收缩率(177℃,1min)为4%～5%的高性能聚酯工业丝。
Based on the equipment for producing conventional polyester Industrial yarn, under the conditions of industrial production, to produce high performance polyester industrial yarn with good dimension stability is selected as a target for this study. How to control the viscosity of upgraded chips, how to select right spinneret and how to set the proper parameters of drawing & heat setting have been systematically investigated, and a successful solution to produce high performance polyester industrial yarn with the EASL(4.0cN/dtex) around 5% and hot air shrinkage (177℃,1 min) from 4% to 5% has been reached.

关键词(KeyWords)： 聚酯工业丝;高模量低收缩;喷丝板参数;拉伸点定位;热定型
polyester industrial yarn,HMLS,spinneret parameter, draw-point localizer, heat setting

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 黄凯,程嘉祺,张金德
HUANG Kai1; CHENG Jia-qi2; ZHANG Jin-de3(1. Reiter Textile Machinery Co.;

参考文献(References)：

• [1]陈振宝等,橡胶用骨架材料市场需求及发展建议[J].橡胶工业,2001,19(11):3~6
• [2]林菘等,高模量低收缩涤纶工业丝生产技术和市场应用.合成纤维工业,2004,5(27),29~32.
• [3]许其军等,子午线轮胎用聚酯增强材料的发展,产业用纺织品,2002,(4):1~3.
• [4]钱明球,韩玉平等.热管纺高模低收缩涤纶工业丝的研究[J].合成技术及应用,1999,14(4);10～12.
• [5]谢崇秀等.FDY高强聚酯工业丝生产技术研究.合成纤维工业.1993,(1).