刘玲玲,周祯德,李红杰
LIU Ling-ling,ZHOU Zhen-de,LI Hong-jie

• 1:上海市纺织工业技术监督所

摘要(Abstract)：

通过对调湿方法、预调湿、预张力三个方面的探索,改进了锦纶工业长丝干热收缩率测试方法。结果表明:锦纶工业长丝在进行干热收缩率测试前,采用10 m长的绞丝进行调湿,可以大大缩短调湿时间至4 h;锦纶工业长丝在进行干热收缩率测试前,应进行预调湿处理,预调湿建议采用50℃处理30 min的方案;热处理预张力偏差降为0.001 cN/dtex,可有效降低测试误差。
By exploring the aspects of humidity control method, pre-conditioning and pre-tension, the test method of shrinkage in hot air of polyamide industrial filament yarn has been improved. The results show that conditioning time can be greatly reduced to 4 hours by using 10 m skein before tested; pre-conditioning is needed before testing and the suggested method is drying at 50 ℃ for 30 min; test error can be effectively reduced, when the pre-tension deviation during heat treatment is reduced to 0.001 cN/dtex.

关键词(KeyWords)： 锦纶;工业长丝;干热收缩率
polyamide fiber;industrial filament yarn;shrinkage in hot air

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 刘玲玲,周祯德,李红杰
LIU Ling-ling,ZHOU Zhen-de,LI Hong-jie

DOI: 10.16090/j.cnki.hcxw.2020.11.011

参考文献(References)：

• [1]艾细英,宁平,赵耀明,等.改性锦纶染色性能研究[J].合成纤维,2004, 33(s1):3-5.
• [2]董召虹,孙莎莎.锦纶纤维的阻燃改性和整理述评[J].现代丝绸科学与技术, 2010, 25(5):33-36.
• [3]徐洁.产业用锦纶66纤维的开发与应用[J].合成纤维, 2012(6):34-35.