程燕婷,孟家光,支超
CHENG Yan-ting,MENG Jia-guang,ZHI Chao

• 1:西安工程大学纺织科学与工程学院

摘要(Abstract)：

以3ds Max软件为平台,采用Peirce圆形理论模型,结合NURBS曲线建模方法,根据控制点坐标确定出机织物基本组织中的纱线轴线路径,通过对纱线截面"放样"、"复制"等操作,得到机织物平纹组织、1/3↗右斜纹组织的三维模型。以柔性聚乳酸耗材为打印材料,通过熔融层积成型(FDM)技术,在3D打印机中对建立的机织物基本组织模型进行立体打印,得到了立体打印的机织物组织。
Based on the 3 ds Max software, the Peirce circle theory model and the NURBS curve modelingmethod were used to determine the yarn axis path of the basic woven fabric texture according to the coordi-nates of the controlled point. Through the operation of lofting and duplication, three-dimensional models ofwoven plain weave, 1/3↗ right twill weave were obtained. Through the FDM technology, the models of thebasic woven fabric texture were printed in the 3 D printer using the flexible polylactic acid materials and thethree-dimensional printing of the basic textures of woven fabric were obtained.

关键词(KeyWords)： 3ds Max软件;NURBS曲线;3D打印;FDM技术;机织物组织
3ds Max software;NURBS curve;3D print;FDM technology;woven fabric texture

Abstract:

Keywords:

基金项目(Foundation): 国家支撑计划项目(2012BAF13B03);; 陕西省科技厅2014年科技创新工程计划项目(2014SZ13-Z01)

作者(Author): 程燕婷,孟家光,支超
CHENG Yan-ting,MENG Jia-guang,ZHI Chao

DOI: 10.16090/j.cnki.hcxw.2018.01.017

参考文献(References)：

• [1]安妮,王佳.3D打印技术对服装定制业的影响初探[J].上海纺织科技,2015(5):1-4.
• [2]LEIST S K,ZHOU J.Current status of 4D printing technology and the potential of light-reactive smart materials as 4D printable materials[J].Virtual and Physical Prototyping,2016:1-14.
• [3]孙雅雯.浅谈服装cad技术在现代服装设计中的应用[J].职业时空,2012(7):172-173.
• [4]ALCOCK C,HUDSON N,CHILANA P K.Barriers to using,customizing,and Printing 3D designs on thingiverse[C].Proceedings of the 19th International Conference on Supporting Group Work.ACM,2016:195-199.
• [5]巫朝港.3D打印技术在现代服装中的运用[J].艺术科技,2015(1):11,127.
• [6]Umetani N,Schmidt R.Cross-sectional structural analysis for 3D printing optimization[J].SIGGRAPH Asia,2013(5):1-4.
• [7]谈静.基于3D打印材料局限性的个性化设计研究—以服装为例[D].武汉:武汉纺织大学,2015.
• [8]刘岩.3D打印面料制备技术探究—棉纤维基溶解制备技术[D].上海:东华大学,2016.
• [9]王彦欣,刘让同.机织物外观模拟技术及其实现方法[J].毛纺科技,2006(2):54-58.
• [10]HWANG Seyeon,REYES Edgar,MOON Kyoung-sik.Method and apparatus for producing parts by selective sintering[C].Abstracts of BIT's1st Annual World Congress of 3D Printing,2014.
• [11]XIA Mujian,GU Dongdong,YU Guanqun.Selective laser melting 3D printing of Ni-based superalloy:understanding thermodynamic mechanisms[J].Science Bulletin,2016,61(13):1013-1022.