尚小冬,李华强,叶星星,姜细思,柯懿,占海华
SHANG Xiao-dong,LI Hua-qiang,YE Xing-xing,JIANG Xi-si,KE Yi,ZHAN Hai-hua(Textile & Garment Institute

• 1:绍兴文理学院纺织服装学院

摘要(Abstract)：

采用经改造的倍捻机及KF6-800弹力机将皮芯型复丝制成新型热熔聚酯单丝,初步探究不同工艺条件下生产的新型热熔聚酯单丝的特性。结果表明:在经改造后的倍捻机上制得的单丝的物理性能及外观截面都好于用KF6-800弹力机所制得的单丝,更适合于产业化的需求。
The modified two-for-one twister and KF6-800 draw-textured machine are used to make hotmelt polyester monofilament from core-sheath polyester multifilament.The properties of new type hot-melt polyester monofilament prepared with different process conditions are investigated.The results indicate that the prepared monofilament has same cross section as sea-island filament,the properties,appearance and cross section of monofilament made by two-for-one twister are better than that of KF6-800 draw-textured machine and is more suitable for industrialization

关键词(KeyWords)： 聚酯热熔单丝;拉伸强度;低熔点
hot-melt polyester monofilament,tensile strength,low melting point

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 尚小冬,李华强,叶星星,姜细思,柯懿,占海华
SHANG Xiao-dong,LI Hua-qiang,YE Xing-xing,JIANG Xi-si,KE Yi,ZHAN Hai-hua(Textile & Garment Institute

DOI: 10.16090/j.cnki.hcxw.2013.02.006

参考文献(References)：

• [1]吴霆.一步法倍捻机工艺参数与工艺效果的关系[J].丝绸,2002(2):33-35.
• [2]李汝勤,宋钧才.纤维和纺织品测试技术[M].上海:东华大学出版社,2009.
• [3]曾新,杨瑞玲,杨昕.低熔点聚酯纤维的纺丝工艺研究[J].合成纤维,2004,33(1):19-20.
• [4]王显楼.涤纶生产基本知识[M].北京:纺织工业出版社,1993:61,96.
• [5]Matthias Wagner.陆立明编译.热分析应用基础[M].上海:东华大学出版社,2011.
• [6]肖茹,杨卫忠,顾利霞.拉伸温度对CDP-FDY纤维收缩性能的影响[J].合成纤维,2002,31(4):12-15.