王汉玉,孙润军
WANG Han-yu,SUN Run-jun

• 1:西安工程大学

摘要(Abstract)：

以无碱玻璃纤维纱为原料,设计了3种不同结构的间隔织物,并在SGA598型全自动剑杆织样机上成功试织。以沉淀法白炭黑粉体作为隔热填料制备复合材料,对不同结构、不同白炭黑填充量的间隔织物增强复合材料的隔热性能进行了测试,结果表明:间隔织物的结构主要影响复合材料的隔热均匀性,蜂巢状和三角形间隔织物的隔热均匀性要优于双层间隔织物;随着隔热材料填充量的增加,织物的温升曲线明显降低。
Three kinds of spacer fabrics with different structures were designed with alkali-free glass fiber yarn as raw materials, and they were successfully woven on the SGA598 full-automatic rapier loom prototype. Precipitation method silica powder was used as the thermal insulation filler to prepare composite materials, and the thermal insulation performance of spacer fabric reinforced composite materials with different structures and different silica filling contents were tested. The results show that the structure of the spacer fabric mainly affects the insulation uniformity of the composite material, and the honeycomb and triangular spacer fabrics are better than the double-layer spacer fabric. With the increase of insulation material, the temperature rise curve of the fabric decreases obviously.

关键词(KeyWords)： 间隔织物;白炭黑;复合材料;隔热性能
spacer fabric;white carbon black;composite material;thermal insulation performance

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 王汉玉,孙润军
WANG Han-yu,SUN Run-jun

DOI: 10.16090/j.cnki.hcxw.2020.12.012

参考文献(References)：

• [1]谢丁文.绝热材料与绝热工程[M].北京:国防工业出版社,2006.
• [2]GEISLER M,VIDI S,EBERT H P.Study on the principle mechanisms of heat transfer for cryogenic insulations:especially accounting for the temperature-dependent deposition-evacuation of the filling gas(self-evacuating systems)[J].International Journal of Thermophysics,2016,37(11):1-13.
• [3]CHUDZIK S.Measurement of thermal parameters of a heat insulating material using infrared thermography[J].Infrared Physics and Technology,2011,55(1):73-83.
• [4]陈春滋,朱未禺.保温绝热材料与应用技术[M].北京：中国建材工业出版社，2005.
• [5]施伟,谭毅,曹作暄.隔热材料研究现状及发展趋势[J].材料导报,2012,26(S1):344-347.
• [6]樊璐.纤维增强树脂基复合材料的微结构及隔热性能[D].哈尔滨:哈尔滨工程大学,2018.
• [7]YANG H X,LI C M,XUE X D,et al.New BN/Si OC aerogel composites fabricated by the sol-gel method with excellent thermal insulation performance at high temperature[J].Materials&Design,2020,185:108217.
• [8]孙云娟,贾立霞,李瑞洲,等.间隔织物面层组织对其增强板材性能的影响[J].产业用纺织品,2011,29(12):20-23.
• [9]陈振宏,贾立霞,刘君妹.接结纱线密度对间隔机织复合板材性能的影响[J].棉纺织技术,2018,46(6):22-25.
• [10]吕丽华,闫淑娟,崔婧蕊,等.日字形间隔机织物设计要点[J].棉纺织技术,2014,42(7):14-16,70.
• [11]韩斌斌,王益轩.三维间隔机织物的设计及织机开发[J].产业用纺织品,2015,33(6):6-11.
• [12]吕丽华,石英路,张雪飞.三种截面三维间隔机织物的设计方法[J].棉纺织技术,2017,45(4):76-79.
• [13]胡慧娜,裴鹏英,胡雨,等.三维机织物的分类、性能及织造[J].纺织导报,2017(12):26-30.
• [14]王梦远,曹海建,钱坤,等.三维机织间隔复合材料结构对其力学性能的影响[J].工程塑料应用,2014,42(11):53-58.