刘晓巧,张琳玫,孟家光,田萌
LIU Xiao-qiao,ZAHNG Lin-mei,MENG Jia-guang,TIAN Meng

• 1:西安工程大学纺织与材料学院
• 2:广州纤维产品检测院

摘要(Abstract)：

将等离子体处理前后的超高相对分子质量聚乙烯(UHMWPE)纤维针织物分别与环氧树脂在平板硫化机上进行复合,制作出UHMWPE纤维针织物复合材料,对其进行裁样,测试UHMWPE纤维针织物复合材料的拉伸、弯曲和压缩性能。结果表明:经等离子体处理后,复合材料的拉伸强度、弯曲强度均有较大提高,压缩强度有小幅增加。
The ultrahigh molecular weight polyethylene(UHMWPE)fibers before and after plasma modifica-tion are made to knitted fabrics,then they are composited with epoxy resin respectively in flat vulcanizingmachine to made UHMWPE fiber knitted fabric composites.The tensile property,bending property andcompressive property of UHMWPE fiber knitted fabric composites are tested.The results show the tensilestrength and the bending strength of the composites are greatly increased,the compressive strength is slight-ly increased.

关键词(KeyWords)： UHMWPE纤维针织物;环氧树脂;复合材料;性能
UHMWPE fiber knitted fabric;epoxy resin;composite;property

Abstract:

Keywords:

基金项目(Foundation): 陕西省2011产业用纺织品协同创新中心科研项目(2015ZX-02)

作者(Author): 刘晓巧,张琳玫,孟家光,田萌
LIU Xiao-qiao,ZAHNG Lin-mei,MENG Jia-guang,TIAN Meng

DOI: 10.16090/j.cnki.hcxw.2016.03.010

参考文献(References)：

• [1]金军,张慧萍,晏雄.超高分子量聚乙烯纤维的表面改性研究[J].产业用纺织品,2012(2):36-40.
• [2]赵晓琳,杜建华,杨宏伟,等.超高分子量聚乙烯纤维的表面改性[J].粉末冶金技术,2015,33(1):58-63.
• [3]Cevdet K N,Nihat A I.Mechanical properties,flammability and char morphology of epoxy resin/montmorillonite nano composites[J].Applied Clay Science,2009(46):319-324.
• [4]黄志雄,秦岩,彭永利.热固性树脂复合材料及其应用[M].化学工业出版社,2007:1-34.
• [5]朱丹,王耀先,程树军.超高分子量聚乙烯纤维复合材料用基体研究进展[C].第十七届玻璃钢/复合材料学术年会论文集,2008:321-324.
• [6]夏晋程.超高分子量聚乙烯的表征与性能研究[D].上海:华东理工大学,2014:36-56.
• [7]陈国芬.纬编布面花纹效应与组织结构的关系[J].针织工业,2005(9):4-6.
• [8]龙海如.纬编针织物增强复合材料研究进展[J].玻璃钢-复合材料,2000(2):48-51.
• [9]王春敏.针织复合材料力学性能的研究[J].材料导报,2011,25(18):277-280.
• [10]Song Qiang,Li Ke-zhi,Li Hai-liang,et al.Grafting straight carbon nanotubes radially onto carbon fibers and their effect on the mechanical properties of carbon/carbon composites[J].Carbon,2012,50(10):3 949-3 952
• [11]陈利,刘景艳,马振杰,等.三维多向编织复合材料压缩性能的试验研究[J].固体火箭技术,2006(1):63-66.
• [12]Khondker O A,Herszberg I,Hamada H.Measurements and prediction of the compression after impact strength of glass knitted textile composites[J].Composites Part A.Applied Science and Manufacturing,2004(35):145-157.
• [13]仝立勇,莫里茨,班尼斯特.3D纤维增强聚合物基复合材[M].北京:科学出版社,2008:123-125.