合成纤维

2007, No.226(12) 16-19+24

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Archive) | 高级检索(Advanced Search)

预氧化温度对聚丙烯腈纳米纤维结构和性能的影响
Effect of the Pre-oxidation Temperature on the Structure and Property of Electrospinning Polyacrylonitrile Nanofibers

赵从涛,覃小红,王善元
ZHAO Cong-tao, QIN Xiao-hong, Wang Shan-yuan (College of Textiles

摘要(Abstract):

通过静电纺丝法制得聚丙烯腈纳米纤维毡,再经过不同的预氧化温度得到预氧化程度不同的纳米预氧化毡。分析了在预氧化毡制备过程中预氧化温度对预氧化毡的结构和性能的影响。研究结果表明:随着温度的升高,拉伸性能和含水率逐渐增强,质量损失率在220~250℃之间快速提高。另外,环化度在220~250℃之间增加得特别快,环化反应主要发生在220℃左右,250℃环化反应基本完全;265℃得到预氧化程度较佳的预氧化毡。
PAN nanofibers webs made by electrospinning were pre-oxidated at different temperatures. Effects of the temperature on the structure and property of pre-oxidation webs were discussed. The results showed that with the increasing temperature, the tensile properties and moisture content gradually increased. Mass loss rate was also found to quickly increase in the range 220~250 ℃. In addition, the cyclization index rapid rise in the range 220~235 ℃. The cyclization reaction was drastic at about 220 ℃ and basically finished at above 250 ℃. When the pre-oxidation temperature was at 265 ℃, pre-oxidation webs had a better pre-oxidation degree.

关键词(KeyWords): 聚丙烯腈;静电纺丝;预氧化;环化度
polyacrylonitrile, electrospinning, pre-oxidation, cyclization index

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(10602014)

作者(Author): 赵从涛,覃小红,王善元
ZHAO Cong-tao, QIN Xiao-hong, Wang Shan-yuan (College of Textiles

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享