风电叶片用碳纤维拉挤板材国产化树脂性能的研究Study on Properties of the Domestic Pultrusion Resin for Carbon Fiber Composites for Wind Turbine Blades
余许多,严兵,张辉,许文前,高洪平,余木火
YU Xu-duo,YAN Bing,ZHANG Hui,XU Wen-qian,GAO Hong-ping,YU Mu-huo
摘要(Abstract)：
随着风电叶片长度的增加,对增强材料的刚度和强度等性能提出了新的要求,使用碳纤维增强已经成为一种发展趋势。选取了国产化的拉挤树脂,对树脂黏度、凝胶时间以及浇筑体性能进行了研究。研究发现:国产化的拉挤树脂具有良好的流动性和浸润性,树脂凝胶时间较长,固化时间较短,非常适于拉挤工艺对树脂的要求;拉挤树脂固化浇筑体的拉伸和弯曲性能均满足拉挤风电复合材料的性能要求。
With the increase of the length of the wind turbine blades, the requirements for the stiffness and strength of the reinforcing materials are becoming more strictly. Herein, the application of carbon fiber stands for the developing direction. In this paper, the viscosity, the gelation time and the mechanical properties of the domestic pultrusion resin were studied. The results indicate that the resin possesses good fluidity and infiltration properties. The long gelation time and short curing time of the resin are suitable for the pultrusion process. In addition, the cured resin performs good tensile and flexural properties which can feed the requirements of the pultrusion wind power composite materials.
关键词(KeyWords)：
碳纤维复合材料;拉挤树脂;拉挤工艺;力学性能
carbon fiber composite;pultrusion resin;pultrusion process;mechanical property
基金项目(Foundation):
作者(Author):
余许多,严兵,张辉,许文前,高洪平,余木火
YU Xu-duo,YAN Bing,ZHANG Hui,XU Wen-qian,GAO Hong-ping,YU Mu-huo
DOI: 10.16090/j.cnki.hcxw.2019.03.012
参考文献(References)：
- [1]罗永康,李炜.碳纤维复合材料在风力发电机叶片中的应用[J].电网与清洁能源, 2008(11):53-57.
- [2]武赛娟.兆瓦级风电叶片碳纤维大梁真空灌注方法[J].中国科技纵横, 2017(2):1671-2064.
- [3]郭云竹.高性能纤维及其复合材料的研究与应用[J].纤维复合材料, 2017(1):7-10.
- [4]尚宝月.风机叶片用玄武岩纤维复合材料的改性研究[D].阜新:辽宁工程技术大学, 2011.
- [5]曾帅.风电叶片用碳/玻层内混杂单向复合材料性能研究[D].上海:东华大学, 2011.
- [6]杨小平.黄智彬.实现节能减排的碳纤维复合材料应用进展[J].材料导报, 2010(3):1-5.
- [7]毛占稳.风力发电机复合材料叶片有限元分析及铺设研究[D].西安:西安理工大学, 2011.
- [8]陈广华.风电机组组合式叶片结构设计研究[D].西安:西安理工大学, 2013.