徐园园,张慧慧,夏玮兰,杨革生,邵惠丽
XU Yuan-yuan,ZHANG Hui-hui,XIA Wei-lan,YANG Ge-sheng,SHAO Hui-li

• 1:高性能纤维及制品教育部重点实验室东华大学材料科学与工程学院
• 2:纤维材料改性国家重点实验室东华大学材料科学与工程学院

摘要(Abstract)：

对聚丙烯基紫外/红外双波长荧光防伪纤维进行高温处理,研究了处理温度及处理时间对双波长荧光纤维的表面形态、结晶性能、荧光性能和力学性能的影响。结果表明:经高温处理后,双波长荧光防伪纤维的表面形貌无显著变化;在120℃高温下对双波长荧光纤维处理≤48 h时,纤维的结晶度随处理时间的延长而逐渐增大;而当处理时间达到72 h时,纤维结晶度略有减小;随高温处理时间的延长或随处理温度的升高,双波长荧光纤维的荧光强度总体上呈现出不断下降之势;高温处理后荧光纤维力学性能有所下降,但会随着时间的延长而趋于稳定。
PP-based UV/IR dual-wavelength fluorescent anti-counterfeiting(DWFA) fibers were treatedunder high temperature, and the effects of processing temperature and processing time on the surface mor-phology, crystalline properties, fluorescent properties and mechanical properties of DWFA fibers were inves-tigated, respectively. The results showed that the surface morphology of DWFA fibers did not change signifi-cantly after high temperature treatment. The crystallinity of DWFA fibers increased with the processingtime when it was ≤48 h, while the crystallinity of fiber decreased slightly when the processing time wasreached to 72 h. With the increase of the processing time or the processing temperature, the fluorescence in-tensity of the DWFA fibers showed a decreasing trend. After high temperature treatment, the mechanicalproperties of DWFA fibers decreased slightly and tended to be stable with the increase of processing time.

关键词(KeyWords)： 双波长荧光纤维;防伪纤维;聚丙烯;耐高温性
dual-wavelength fluorescent fiber;anti-counterfeiting fiber;PP;high temperature resistance

Abstract:

Keywords:

基金项目(Foundation): 中央高校基本科研业务费专项资金资助项目(编号17D110622,2232015G1-25)

作者(Author): 徐园园,张慧慧,夏玮兰,杨革生,邵惠丽
XU Yuan-yuan,ZHANG Hui-hui,XIA Wei-lan,YANG Ge-sheng,SHAO Hui-li

DOI: 10.16090/j.cnki.hcxw.2018.01.013

参考文献(References)：

• [1]王艳忠,黄素萍.荧光防伪纤维的制造方法及其应用[J].合成纤维,2000,29(4):20-22.
• [2]CUI Y,PHANG I Y,LEE Y H,et al.Multiplex plasmonic anti-counterfeiting security labels based on surface-enhanced Raman scattering[J].Chemical Communications,2015,51(25):5363-5366.
• [3]龚静华,黄素萍,秦伟.双波长荧光防伪纤维的研究[J].上海纺织科技,2002,30(5):14-15.
• [4]HOUSMANS J-W,STEENBAKKERS R J,ROOZEMOND P C,et al.Saturation of pointlike nuclei and the transition to oriented structures in flow-induced crystallization of isotactic polypropylene[J].Macromolecules,2009,42(15):5728-5740.
• [5]BRANDRUP J,IMMERGUT E H,GRULKE E A,et al.Polymer Handbook[M].Wiley New York,1989.
• [6]钱欣,郑荣华,蔡鹏.聚丙烯的热氧老化及其影响因素[J].浙江工业大学学报,2002,30(5):475-480.
• [7]HOFF A,JACOBSSON S.Thermal oxidation of polypropylene in the temperature range of 120~280℃[J].Journal of Applied Polymer Science,1984,29(2):465-480.
• [8]GENSLER R,PLUMMER C,KAUSCH H-H,et al.Thermo-oxidative degradation of isotactic polypropylene at high temperatures:phenolic antioxidants vrsus HAS[J].Polymer Degradation and Stability,2000,67(2):195-208.