共聚酯的合成与性能表征Synthesis and Characterization of Copolyester
孙小甫,陈世昌,杨志超,曾卫卫,张先明,陈文兴
SUN Xiao-fu,CHEN Shi-chang,YANG Zhi-chao,ZENG Wei-wei,ZHANG Xian-ming,CHEN Wen-xing
摘要(Abstract)：
以对苯二甲酸、乙二醇为主要原料,添加共聚单体新戊二醇(NPG)、5-叔丁基间苯二甲酸(tBI),通过熔融缩聚合成了一系列不同组成比例的共聚酯,分析了共聚酯的化学结构与组成、特性黏度、热性能、结晶性能和动态热力学性能。结果表明:随着tBI和NPG含量的增加,共聚酯的熔点降低,结晶能力逐渐减弱;当tBI和NPG物质的量分数总和达到13%及以上时,共聚酯为完全无定形态;tBI单元的加入使共聚酯的玻璃化转变温度升高,弥补了PENT共聚酯玻璃化转变温度低于PET的缺点;共聚酯的初始分解温度高于PET,初始储能模量大于PET,而随着测试温度的升高,共聚酯的柔韧性大于PET材料。
A series of copolyester were synthesized through two-stage melt polycondensation reaction using pure terephthalic acid and ethylene glycol as main monomer, as well as by adding different amounts of the comonomers 5-tert-butylisophthalic acid(tBI) and neopentyl glycol(NPG). The chemical structure and compositions, intrinsic viscosities, thermal properties, crystallization properties and dynamic thermomechanical properties of copolyesters were investigated. The results exhibite that the melting point and crystallization properties gradually decrease as the increase of the contents of tBI and NPG units. When the molar fraction of tBI and NPG is 13% or more, the copolyesters are amorphous. The addition of the tBI unit increases the glass transition temperature(Tg) of the copolyesters, whicn makes up for the shortcomings of the glass transtition temperature of PENT copolyester lower than that of PET. The initial degradation temperature of the copolyesters are higher than that of the PET. The initial storage modulus of the copolyesters are stronger than that of the PET, but the flexibility of copolyesters are greater than that of the PET as the test temperature increases.
关键词(KeyWords)：
新戊二醇;5-叔丁基间苯二甲酸;共聚酯;性能
neopentyl glycol;5-tert-butylisophthalic acid;copolyester;performance
基金项目(Foundation): 国家重点研发计划项目(2016YFB0303000)
作者(Author):
孙小甫,陈世昌,杨志超,曾卫卫,张先明,陈文兴
SUN Xiao-fu,CHEN Shi-chang,YANG Zhi-chao,ZENG Wei-wei,ZHANG Xian-ming,CHEN Wen-xing
DOI: 10.16090/j.cnki.hcxw.20190114.005
参考文献(References)：
- [1] PANG J F, ZHENG M Y, SUN R Y, et al. Synthesis of ethylene glycol and terephthalic acid from biomass for producing PET[J]. Green Chemistry, 2016, 18:342-359.
- [2]袁效东,马建平,张先明,等.不同特性黏度PET切片的制备及加工特性研究[J].浙江理工大学学报, 2017, 37(2):208-213.
- [3] TSAI Y, FAN C H, HUNG C Y, et al. Amorphous copolyesters based on 1,3/1,4-cyclohexanedimethanol:synthesis, characterization and properties[J]. Journal of Applied Polymer Science, 2008, 109:2598-2604.
- [4] ZHOU R, WANG X L, HUANG L Q, et al. Poly(ethylene terephthalate)copolyesters and fibers modified with NPG and SIPE for improved hydrophilicity and dyeability[J]. The Journal of The Textile Institute, 2017,108(11):1949-1956.
- [5] JING X K, GE X G, XIANG X, et al. A novel phosphorus-containing copolyester with low melting temperature and high flame retardancy[J].Polymer International, 2009, 58:1202-1208.
- [6] DING L P, XIE L, CAO J Y, et al. Crystallization behavior of poly(ethylene terephthalate-co-neopentyl terephthalate-co-ethylene isophthalate-co-neopentyl isophthalate)copolyester and its application in laminated tin-free steel[J]. Journal of Applied Polymer Science, 2015, 132:242-249.
- [7] TSUYOSHI K, SUSUMU M, NAOTO T, et al. Biodegradability of poly(ethylene terephthalate)copolymers with poly(ethylene glycol)s and poly(tetramethylene glycol)[J]. Polymer International, 1996, 39:83-89.
- [8] WAN S H, YONG K C, SEUNG S J, et al. Preparation of poly(ethylene terephthalate-co-isophthalate)by ester interchange reaction in the PET/PEI blend system[J]. Journal of Polymer Science:Part B:Polymer Physics,1997, 35:309-315.
- [9] TSAI Y, FAN C H, HUNG C Y, et al. Poly(ethylene terephthalate)copolymers that contain 5-tert-butylisophthalic acid and 1-3/1-4-cyclohexanedimethanol:Synthesis,Characterization, and Properties[J]. Journal of Applied Polymer Science, 2007, 104:279-285.
- [10] KIM J H, KIM J R, AHN C H. Novel biobased copolyesters based on1,2-propanediol or 2,3-butanediol with the same ethylene skeletal structure as PETG[J]. Polymer, 2018, 135:314-326.
- [11]杨振国,喻松,佐岐.纤维级PET切片国家标准及产品品质评价[J].聚酯工业, 2010, 23(3):26-28.
- [12]王雁冰,黄志雄,张联盟. DMA在高分子材料研究中的应用[J].国外建材科技, 2004, 25(2):25-27.