伍三华,韩风,王永梅
WU San-hua,HAN Feng,WANG Yong-mei(Acrylic Fibers Division

• 1:上海石油化工股份有限公司腈纶部

摘要(Abstract)：

利用傅里叶红外光谱、能谱、等离子发射光谱、液相色谱及元素分析仪等多种手段,深入分析了腈纶生产现场陶瓷罗拉的腐蚀现象,并探析了腐蚀产生的原因。通过定性、定量分析得出:陶瓷罗拉腐蚀的原因主要是罗拉表面孔洞多,封孔材料耐热性、耐腐蚀性差。
The ceramic roller erosion phenomenon and its causes at polyacrylic fiber production site were investigated deeply by fourier transform infrared spectroscope(FTIR),energy dispersion spectrometer,plasma emission spectrum,liquid phase chromatography and elemental analyzer.The qualitative and quantitative analysis showed that ceramic roller erosion was due to the more holes on roller surface and poor heat-resistance and erosion resistance of sealing material.

关键词(KeyWords)： 陶瓷罗拉;腐蚀;傅里叶红外光谱;等离子发射光谱;液相色谱
ceramic roller,erosion,FTIR,plasma emission spectrum,liquid phase chromatography

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 伍三华,韩风,王永梅
WU San-hua,HAN Feng,WANG Yong-mei(Acrylic Fibers Division

DOI: 10.16090/j.cnki.hcxw.2013.05.009

参考文献(References)：

• [1]江志强,席守谋,李华伦.等离子喷涂陶瓷涂层封孔处理的现状与展望[J].兵器材料科学与工程,1999,22(3):56-60.
• [2]张晶晶,王泽华,林萍华,等.封孔处理对等离子喷涂Cr2O3-8TiO2涂层耐腐蚀性能的影响[J].材料科学与工艺,2010,18(5):700-705.
• [3]王永兵,刘湘,祁文军,等.热喷涂技术的发展和应用[J].电镀与涂饰,2007,26(7):52-55.