林雪燕,王春燕,张玉勤,林稳
LIN Xue-yan,WANG Chun-yan,ZHANG Yu-qin,LIN Wen

• 1:桐昆集团股份有限公司

摘要(Abstract)：

探讨了影响82.5 dtex/36 f扁平涤纶全拉伸丝(FDY)染色M率的因素。通过试验得出:关闭缓冷器,无风区高度加高为80 mm,风筒高度增大为400 mm,纺丝风压65 Pa,预网络气压0.05 MPa,油剂质量分数19%时,纤维染色M率最高。
Factors that affected the dyeing M rate(evenness dyeing indicator) of 82.5 dtex/36 f polyester flatFDY were analyzed. The results show that when closing the annealing device, height of windless region is80 mm, height of fan drum is 400 mm, spinning pressure is 65 Pa, pre-interlaced air pressure is 0.05 MPa,oil concentration is 19%, the dyeing M rate of 82.5 dtex/36 f polyester flat FDY can get the highest value.

关键词(KeyWords)： 涤纶;FDY;染色M率
polyester;FDY;dyeing M rate

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 林雪燕,王春燕,张玉勤,林稳
LIN Xue-yan,WANG Chun-yan,ZHANG Yu-qin,LIN Wen

DOI: 10.16090/j.cnki.hcxw.2018.03.010

参考文献(References)：

• [1]代居宴.高速纺三叶异形超亮涤纶染色影响因素的探讨[J].合成纤维,2009,38(7):38-41.
• [2]郑正举,卢伟东.24头纺涤纶FDY染色影响因素的探讨[J].合成纤维,2010,39(6):44-46.
• [3]卞光明.直接纺涤纶FDY扁平丝的工艺探讨[J].合成技术及应用.2006,21(2):55-57.
• [4]张瑞志.高分子材料生产加工设备[M].北京.中国纺织出版社,2004.